ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: etc

###
### Sample Wget initialization file .wgetrc
###

## You can use this file to change the default behaviour of wget or to
## avoid having to type many many command-line options. This file does
## not contain a comprehensive list of commands -- look at the manual
## to find out what you can put into this file.
##
## Wget initialization file can reside in /etc/wgetrc
## (global, for all users) or $HOME/.wgetrc (for a single user).
##
## To use the settings in this file, you will have to uncomment them,
## as well as change them, in most cases, as the values on the
## commented-out lines are the default values (e.g. "off").

##
## Global settings (useful for setting up in /etc/wgetrc).
## Think well before you change them, since they may reduce wget's
## functionality, and make it behave contrary to the documentation:
##

# You can set retrieve quota for beginners by specifying a value
# optionally followed by 'K' (kilobytes) or 'M' (megabytes).  The
# default quota is unlimited.
#quota = inf

# You can lower (or raise) the default number of retries when
# downloading a file (default is 20).
#tries = 20

# Lowering the maximum depth of the recursive retrieval is handy to
# prevent newbies from going too "deep" when they unwittingly start
# the recursive retrieval.  The default is 5.
#reclevel = 5

# By default Wget uses "passive FTP" transfer where the client
# initiates the data connection to the server rather than the other
# way around.  That is required on systems behind NAT where the client
# computer cannot be easily reached from the Internet.  However, some
# firewalls software explicitly supports active FTP and in fact has
# problems supporting passive transfer.  If you are in such
# environment, use "passive_ftp = off" to revert to active FTP.
#passive_ftp = off

# The "wait" command below makes Wget wait between every connection.
# If, instead, you want Wget to wait only between retries of failed
# downloads, set waitretry to maximum number of seconds to wait (Wget
# will use "linear backoff", waiting 1 second after the first failure
# on a file, 2 seconds after the second failure, etc. up to this max).
#waitretry = 10

##
## Local settings (for a user to set in his $HOME/.wgetrc).  It is
## *highly* undesirable to put these settings in the global file, since
## they are potentially dangerous to "normal" users.
##
## Even when setting up your own ~/.wgetrc, you should know what you
## are doing before doing so.
##

# Set this to on to use timestamping by default:
#timestamping = off

# It is a good idea to make Wget send your email address in a `From:'
# header with your request (so that server administrators can contact
# you in case of errors).  Wget does *not* send `From:' by default.
#header = From: Your Name <username@site.domain>

# You can set up other headers, like Accept-Language.  Accept-Language
# is *not* sent by default.
#header = Accept-Language: en

# You can set the default proxies for Wget to use for http, https, and ftp.
# They will override the value in the environment.
#https_proxy = http://proxy.yoyodyne.com:18023/
#http_proxy = http://proxy.yoyodyne.com:18023/
#ftp_proxy = http://proxy.yoyodyne.com:18023/

# If you do not want to use proxy at all, set this to off.
#use_proxy = on

# You can customize the retrieval outlook.  Valid options are default,
# binary, mega and micro.
#dot_style = default

# Setting this to off makes Wget not download /robots.txt.  Be sure to
# know *exactly* what /robots.txt is and how it is used before changing
# the default!
#robots = on

# It can be useful to make Wget wait between connections.  Set this to
# the number of seconds you want Wget to wait.
#wait = 0

# You can force creating directory structure, even if a single is being
# retrieved, by setting this to on.
#dirstruct = off

# You can turn on recursive retrieving by default (don't do this if
# you are not sure you know what it means) by setting this to on.
#recursive = off

# To always back up file X as X.orig before converting its links (due
# to -k / --convert-links / convert_links = on having been specified),
# set this variable to on:
#backup_converted = off

# To have Wget follow FTP links from HTML files by default, set this
# to on:
#follow_ftp = off

# To try ipv6 addresses first:
#prefer-family = IPv6

# Set default IRI support state
#iri = off

# Force the default system encoding
#locale = UTF-8

# Force the default remote server encoding
#remoteencoding = UTF-8

[+] ..
[-] virc [edit]
[-] at.deny [edit]
[-] elinks.conf [edit]
[-] makedumpfile.conf.sample [edit]
[-] cpanel_mail_netblocks [edit]
[-] nsswitch.conf [edit]
[-] screenrc [edit]
[-] letsencrypt-cpanel.licence [edit]
[-] system-release [edit]
[-] trueuserdomains [edit]
[+] dovecot
[-] grub2.cfg [edit]
[-] named.iscdlv.key [edit]
[-] ipaddrpool [edit]
[-] exim.crt [edit]
[-] rpc [edit]
[-] recent_recipient_mail_server_ips [edit]
[+] ld.so.conf.d
[-] profile [edit]
[-] relayhostsusers [edit]
[-] exim.conf.local [edit]
[-] os-release [edit]
[+] nginx
[-] mtab [edit]
[-] npmrc [edit]
[-] inittab [edit]
[-] trueuserowners [edit]
[-] outgoing_mail_hold_users [edit]
[-] exim.key [edit]
[-] passwd- [edit]
[-] lynx.lss [edit]
[-] demousers [edit]
[+] cron.hourly
[+] gssproxy
[-] localdomains [edit]
[+] dbus-1
[+] gnupg
[+] firewalld
[-] environment [edit]
[+] kernel
[-] magic [edit]
[-] wwwacct.conf.cache [edit]
[-] digestshadow [edit]
[-] domain_secondary_mx_ips.cdb [edit]
[-] netconfig [edit]
[+] ppp
[+] request-key.d
[+] rc1.d
[-] userdatadomains [edit]
[-] cpupdate.conf [edit]
[+] egl
[-] els-release [edit]
[-] rc.local [edit]
[+] ImageMagick-6
[+] cron.daily
[+] init.d
[-] lynx-site.cfg [edit]
[-] sestatus.conf [edit]
[-] odbcinst.ini [edit]
[-] outgoing_mail_suspended_users [edit]
[+] pki
[+] xinetd.d
[-] sudo.conf [edit]
[+] modules-load.d
[-] ssldomains [edit]
[-] pure-ftpd.pem [edit]
[-] statetab [edit]
[+] xml
[-] group- [edit]
[-] exim_trusted_configs [edit]
[-] greylist_common_mail_providers [edit]
[+] rsyslog.d
[-] userplans [edit]
[+] cagefs
[+] krb5.conf.d
[-] named.conf.precpanelinstall [edit]
[-] letsencrypt-cpanel.conf [edit]
[+] default
[+] udev
[-] bashrc [edit]
[+] rc.d
[-] secondarymx [edit]
[+] wafd_imunify
[+] vdomainaliases
[-] shells [edit]
[-] named.rfc1912.zones [edit]
[-] networks [edit]
[-] shadow.nouids.cache [edit]
[-] mke2fs.conf [edit]
[-] dbowners [edit]
[-] suphp.conf.rpmnew [edit]
[-] favicon.png [edit]
[-] cron.deny [edit]
[+] libpaper.d
[+] ssh
[-] redhat-release [edit]
[-] exim.conf.mailman2.exiscan.dist [edit]
[-] mailips [edit]
[-] passwd.nouids.cache [edit]
[-] protocols [edit]
[-] eximrejects [edit]
[+] selinux
[-] domainusers [edit]
[+] logrotate.d
[-] rsyncd.conf [edit]
[+] rc4.d
[-] backupmxhosts [edit]
[-] filesystems [edit]
[-] issue.net [edit]
[+] skel
[-] nsswitch.conf.bak [edit]
[-] named.conf.prerebuilddnsconfig [edit]
[+] audisp
[-] mime.types [edit]
[-] named.conf.rebuilddnsconfig [edit]
[-] centos-release [edit]
[+] dsniff
[+] mail
[+] modprobe.d
[-] vconsole.conf [edit]
[-] nanorc [edit]
[+] alternatives
[-] lynx.cfg [edit]
[-] yum.conf [edit]
[-] centos-release-upstream [edit]
[-] request-key.conf [edit]
[-] libuser.conf [edit]
[+] sgml
[+] imunify360
[-] e2fsck.conf [edit]
[-] mailcap [edit]
[-] exim.conf [edit]
[-] nscd.conf [edit]
[-] crontab [edit]
[-] vdpau_wrapper.cfg [edit]
[-] dracut.conf [edit]
[+] pulse
[-] p0fdisable [edit]
[-] nfs.conf [edit]
[+] pdns
[-] shadow [edit]
[+] pkcs11
[+] pure-ftpd
[-] senderverifybypasshosts [edit]
[-] userdomains [edit]
[-] cpsources.conf.plugins.example [edit]
[+] binfmt.d
[-] gshadow- [edit]
[-] antivirus.exim [edit]
[+] vfilters
[-] .pwd.lock [edit]
[-] named.root.key [edit]
[+] imunify-agent-proxy
[+] X11
[-] eximmailtrap [edit]
[+] chkconfig.d
[-] printcap [edit]
[-] userbwlimits [edit]
[+] audit
[-] fstab [edit]
[-] skipsmtpcheckhosts [edit]
[-] trustedmailhosts [edit]
[+] sasl2
[-] domainips [edit]
[-] issue [edit]
[+] rc5.d
[-] lock_manager_local.ini [edit]
[+] sysctl.d
[-] DIR_COLORS [edit]
[-] ftpd-ca.pem [edit]
[-] userdatadomains.json [edit]
[-] asound.conf [edit]
[-] mailbox_formats [edit]
[+] my.cnf.d
[-] group [edit]
[+] cron.d
[-] blocked_incoming_email_countries [edit]
[+] rc0.d
[-] DIR_COLORS.256color [edit]
[-] sudo-ldap.conf [edit]
[-] libaudit.conf [edit]
[+] snmp
[-] wwwacct.conf.shadow [edit]
[-] blocked_incoming_email_domains [edit]
[+] cpanel
[+] statetab.d
[-] wwwacct.conf [edit]
[-] .updated [edit]
[-] exim.pl.local [edit]
[-] host.conf [edit]
[-] suphp.conf [edit]
[+] chkserv.d
[-] cpspamd.conf [edit]
[+] ghostscript
[-] trusted-key.key [edit]
[+] sysconfig
[-] machine-id [edit]
[+] openldap
[-] domain_remote_mx_ips.cdb [edit]
[-] wgetrc [edit]
[-] webspam [edit]
[+] fastcomet
[-] passwd.cache [edit]
[-] hosts [edit]
[-] relayhosts [edit]
[+] popt.d
[-] .whostmgrft [edit]
[+] exports.d
[-] gshadow [edit]
[+] rwtab.d
[-] stats.conf [edit]
[+] dhcp
[-] papersize [edit]
[-] exim.conf.localopts [edit]
[-] adjtime [edit]
[-] exim_suspended_list [edit]
[+] prelink.conf.d
[+] mc
[+] named
[+] dracut.conf.d
[+] plymouth
[+] rc6.d
[+] depmod.d
[-] pure-ftpd.conf.rpmnew [edit]
[-] kdump.conf [edit]
[-] system-release-cpe [edit]
[-] ips [edit]
[+] yum
[-] hosts.allow [edit]
[+] sudoers.d
[+] groff
[+] cron.weekly
[+] scl
[-] sudoers [edit]
[-] exim.conf.dist [edit]
[+] valiases
[+] qemu-ga
[-] pure-ftpd.conf.i360bak [edit]
[-] named.conf.cache [edit]
[+] pm
[-] mail.rc [edit]
[-] nfsmount.conf [edit]
[-] remotedomains [edit]
[-] ethertypes [edit]
[+] ssl
[-] manualmx [edit]
[-] nsswitch.conf.rpmnew [edit]
[-] tcsd.conf [edit]
[-] GREP_COLORS [edit]
[-] services [edit]
[-] csh.cshrc [edit]
[-] exim.pl [edit]
[-] aliases.rpmnew [edit]
[+] fonts
[+] rpm
[-] demouids [edit]
[-] recent_authed_mail_ips_users [edit]
[+] yum.repos.d
[+] apache2
[+] csf
[+] smartmontools
[-] idmapd.conf [edit]
[-] shadow- [edit]
[-] man_db.conf [edit]
[-] hostname [edit]
[+] profile.d
[-] email_send_limits [edit]
[-] named.conf.zonedir.cache [edit]
[+] NetworkManager
[+] xdg
[-] logrotate.conf [edit]
[+] dpkg
[-] eximrejects.rpmorig [edit]
[-] motd [edit]
[+] opt
[+] gss
[-] localaliases [edit]
[-] neighbor_netblocks [edit]
[-] ftpd-rsa.pem [edit]
[-] wwwacct.conf.shadow.cache [edit]
[+] polkit-1
[+] bash_completion.d
[-] spammers [edit]
[-] resolv.conf [edit]
[+] proftpd
[-] subgid [edit]
[-] hosts.deny [edit]
[-] aliases [edit]
[+] cron.monthly
[-] cpanel_exim_system_filter [edit]
[-] whois.conf [edit]
[+] pam.d
[-] userips [edit]
[-] sysctl.conf [edit]
[-] csh.login [edit]
[+] bitninja
[-] inputrc [edit]
[+] iproute2
[+] openal
[-] trusted_mail_users [edit]
[-] localtime [edit]
[+] python
[-] GeoIP.conf [edit]
[-] exports [edit]
[+] libnl
[+] container
[-] passwd [edit]
[-] crypttab [edit]
[-] greylist_trusted_netblocks [edit]
[+] terminfo
[+] rc2.d
[-] mailhelo [edit]
[-] krb5.conf [edit]
[-] my.cnf [edit]
[+] systemd
[+] glvnd
[+] tuned
[+] gcrypt
[-] securetty [edit]
[-] named.conf [edit]
[-] pure-ftpd.conf [edit]
[-] .letsencrypt-cpanel-api-token [edit]
[-] demodomains [edit]
[-] exim.conf.mailman2.dist [edit]
[-] nocgiusers [edit]
[-] DIR_COLORS.lightbgcolor [edit]
[-] rsyslog.conf [edit]
[-] anacrontab [edit]
[-] recent_authed_mail_ips [edit]
[-] rwtab [edit]
[-] vimrc [edit]
[+] tmpfiles.d
[-] blocked_incoming_email_country_ips [edit]
[-] login.defs [edit]
[+] grub.d
[+] sw-engine
[-] ld.so.cache [edit]
[-] subuid [edit]
[-] ftpd-rsa-key.pem [edit]
[+] imunify360-webshield
[-] spammeripblocks [edit]
[-] ld.so.conf [edit]
[+] cl.selector
[+] security
[-] locale.conf [edit]
[+] rc3.d
[+] wpa_supplicant