ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: etc

# This file contains a series of commands to perform (in order) in the kdump
# kernel after a kernel crash in the crash kernel(1st kernel) has happened.
#
# Directives in this file are only applicable to the kdump initramfs, and have
# no effect once the root filesystem is mounted and the normal init scripts are
# processed.
#
# Currently, only one dump target and path can be specified.  If the dumping to
# the configured target fails, the default action which can be configured via
# the "default" directive will be performed.
#
# Supported options:
#
# raw <partition>
#           - Will dd /proc/vmcore into <partition>.
#             Use persistent device names for partition devices,
#             such as /dev/vg/<devname>.
#
# nfs <nfs mount>
#           - Will mount nfs to <mnt>, and copy /proc/vmcore to
#             <mnt>/<path>/%HOST-%DATE/, supports DNS.
#
# ssh <user@server>
#           - Will scp /proc/vmcore to <user@server>:<path>/%HOST-%DATE/,
#             supports DNS.
#             NOTE: make sure the user has write permissions on the server.
#
# sshkey <path>
#           - Will use the sshkey to do ssh dump.
#             Specify the path of the ssh key to use when dumping
#             via ssh. The default value is /root/.ssh/kdump_id_rsa.
#
# <fs type> <partition>
#           - Will mount -t <fs type> <partition> <mnt>, and copy
#             /proc/vmcore to <mnt>/<path>/%HOST_IP-%DATE/.
#             NOTE: <partition> can be a device node, label or uuid.
#             It's recommended to use persistent device names
#             such as /dev/vg/<devname>.
#             Otherwise it's suggested to use label or uuid.
#
# path <path>
#           - "path" represents the file system path in which vmcore
#             will be saved.  If a dump target is specified in
#             kdump.conf, then "path" is relative to the specified
#             dump target.
#
#             Interpretation of "path" changes a bit if the user didn't
#             specify any dump target explicitly in kdump.conf.  In this
#             case, "path" represents the absolute path from root. The
#             dump target and adjusted path are arrived at automatically
#             depending on what's mounted in the current system.
#
#             Ignored for raw device dumps.  If unset, will use the default
#             "/var/crash".
#
# core_collector <command> <options>
#           - This allows you to specify the command to copy
#             the vmcore.  The default is makedumpfile, which on
#             some architectures can drastically reduce vmcore size.
#             See /sbin/makedumpfile --help for a list of options.
#             Note that the -i and -g options are not needed here,
#             as the initrd will automatically be populated with a
#             config file appropriate for the running kernel.
#             The default core_collector for raw/ssh dump is:
#             "makedumpfile -F -l --message-level 1 -d 31".
#             The default core_collector for other targets is:
#             "makedumpfile -l --message-level 1 -d 31".
#
#             "makedumpfile -F" will create a flattened vmcore.
#             You need to use "makedumpfile -R" to rearrange the dump data to
#             a normal dumpfile readable with analysis tools.  For example:
#             "makedumpfile -R vmcore < vmcore.flat".
#
#             For core_collector format details, you can refer to
#             kexec-kdump-howto.txt or kdump.conf manpage.
#
# kdump_post <binary | script>
#           - This directive allows you to run a executable binary
#             or script after the vmcore dump process terminates.
#             The exit status of the current dump process is fed to
#             the executable binary or script as its first argument.
#
# kdump_pre <binary | script>
#           - Works like the "kdump_post" directive, but instead of running
#             after the dump process, runs immediately before it.
#             Exit status of this binary is interpreted as follows:
#             0 - continue with dump process as usual
#             non 0 - reboot the system
#
# extra_bins <binaries | shell scripts>
#           - This directive allows you to specify additional binaries or
#             shell scripts to be included in the kdump initrd.
#             Generally they are useful in conjunction with a kdump_post
#             or kdump_pre binary or script which depends on these extra_bins.
#
# extra_modules <module(s)>
#           - This directive allows you to specify extra kernel modules
#             that you want to be loaded in the kdump initrd.
#             Multiple modules can be listed, separated by spaces, and any
#             dependent modules will automatically be included.
#
# default <reboot | halt | poweroff | shell | dump_to_rootfs>
#           - Action to perform in case dumping fails.
#             reboot:   Reboot the system.
#             halt:     Halt the system.
#             poweroff: Power down the system.
#             shell:    Drop to a bash shell.
#                       Exiting the shell reboots the system.
#             dump_to_rootfs:  Dump vmcore to rootfs from initramfs context and
#                       reboot. Useful when non-root dump target is specified.
#             The default option is "reboot".
#
# force_rebuild <0 | 1>
#           - By default, kdump initrd will only be rebuilt when necessary.
#             Specify 1 to force rebuilding kdump initrd every time when kdump
#             service starts.
#
# force_no_rebuild <0 | 1>
#           - By default, kdump initrd will be rebuilt when necessary.
#             Specify 1 to bypass rebuilding of kdump initrd.
#
#             force_no_rebuild and force_rebuild options are mutually
#             exclusive and they should not be set to 1 simultaneously.
#
# override_resettable <0 | 1>
#           - Usually an unresettable block device can't be a dump target.
#             Specifying 1 when you want to dump even though the block
#             target is unresettable
#             By default, it is 0, which will not try dumping destined to fail.
#
# dracut_args <arg(s)>
#           - Pass extra dracut options when rebuilding kdump initrd.
#
# fence_kdump_args <arg(s)>
#           - Command line arguments for fence_kdump_send (it can contain
#             all valid arguments except hosts to send notification to).
#
# fence_kdump_nodes <node(s)>
#           - List of cluster node(s) except localhost, separated by spaces,
#             to send fence_kdump notifications to.
#             (this option is mandatory to enable fence_kdump).
#

#raw /dev/vg/lv_kdump
#ext4 /dev/vg/lv_kdump
#ext4 LABEL=/boot
#ext4 UUID=03138356-5e61-4ab3-b58e-27507ac41937
#nfs my.server.com:/export/tmp
#ssh user@my.server.com
#sshkey /root/.ssh/kdump_id_rsa
path /var/crash
core_collector makedumpfile -l --message-level 1 -d 31
#core_collector scp
#kdump_post /var/crash/scripts/kdump-post.sh
#kdump_pre /var/crash/scripts/kdump-pre.sh
#extra_bins /usr/bin/lftp
#extra_modules gfs2
#default shell
#force_rebuild 1
#force_no_rebuild 1
#dracut_args --omit-drivers "cfg80211 snd" --add-drivers "ext2 ext3"
#fence_kdump_args -p 7410 -f auto -c 0 -i 10
#fence_kdump_nodes node1 node2

[+] ..
[-] virc [edit]
[-] at.deny [edit]
[-] elinks.conf [edit]
[-] makedumpfile.conf.sample [edit]
[-] cpanel_mail_netblocks [edit]
[-] nsswitch.conf [edit]
[-] screenrc [edit]
[-] letsencrypt-cpanel.licence [edit]
[-] system-release [edit]
[-] trueuserdomains [edit]
[+] dovecot
[-] grub2.cfg [edit]
[-] named.iscdlv.key [edit]
[-] ipaddrpool [edit]
[-] exim.crt [edit]
[-] rpc [edit]
[-] recent_recipient_mail_server_ips [edit]
[+] ld.so.conf.d
[-] profile [edit]
[-] relayhostsusers [edit]
[-] exim.conf.local [edit]
[-] os-release [edit]
[+] nginx
[-] mtab [edit]
[-] npmrc [edit]
[-] inittab [edit]
[-] trueuserowners [edit]
[-] outgoing_mail_hold_users [edit]
[-] exim.key [edit]
[-] passwd- [edit]
[-] lynx.lss [edit]
[-] demousers [edit]
[+] cron.hourly
[+] gssproxy
[-] localdomains [edit]
[+] dbus-1
[+] gnupg
[+] firewalld
[-] environment [edit]
[+] kernel
[-] magic [edit]
[-] wwwacct.conf.cache [edit]
[-] digestshadow [edit]
[-] domain_secondary_mx_ips.cdb [edit]
[-] netconfig [edit]
[+] ppp
[+] request-key.d
[+] rc1.d
[-] userdatadomains [edit]
[-] cpupdate.conf [edit]
[+] egl
[-] els-release [edit]
[-] rc.local [edit]
[+] ImageMagick-6
[+] cron.daily
[+] init.d
[-] lynx-site.cfg [edit]
[-] sestatus.conf [edit]
[-] odbcinst.ini [edit]
[-] outgoing_mail_suspended_users [edit]
[+] pki
[+] xinetd.d
[-] sudo.conf [edit]
[+] modules-load.d
[-] ssldomains [edit]
[-] pure-ftpd.pem [edit]
[-] statetab [edit]
[+] xml
[-] group- [edit]
[-] exim_trusted_configs [edit]
[-] greylist_common_mail_providers [edit]
[+] rsyslog.d
[-] userplans [edit]
[+] cagefs
[+] krb5.conf.d
[-] named.conf.precpanelinstall [edit]
[-] letsencrypt-cpanel.conf [edit]
[+] default
[+] udev
[-] bashrc [edit]
[+] rc.d
[-] secondarymx [edit]
[+] wafd_imunify
[+] vdomainaliases
[-] shells [edit]
[-] named.rfc1912.zones [edit]
[-] networks [edit]
[-] shadow.nouids.cache [edit]
[-] mke2fs.conf [edit]
[-] dbowners [edit]
[-] suphp.conf.rpmnew [edit]
[-] favicon.png [edit]
[-] cron.deny [edit]
[+] libpaper.d
[+] ssh
[-] redhat-release [edit]
[-] exim.conf.mailman2.exiscan.dist [edit]
[-] mailips [edit]
[-] passwd.nouids.cache [edit]
[-] protocols [edit]
[-] eximrejects [edit]
[+] selinux
[-] domainusers [edit]
[+] logrotate.d
[-] rsyncd.conf [edit]
[+] rc4.d
[-] backupmxhosts [edit]
[-] filesystems [edit]
[-] issue.net [edit]
[+] skel
[-] nsswitch.conf.bak [edit]
[-] named.conf.prerebuilddnsconfig [edit]
[+] audisp
[-] mime.types [edit]
[-] named.conf.rebuilddnsconfig [edit]
[-] centos-release [edit]
[+] dsniff
[+] mail
[+] modprobe.d
[-] vconsole.conf [edit]
[-] nanorc [edit]
[+] alternatives
[-] lynx.cfg [edit]
[-] yum.conf [edit]
[-] centos-release-upstream [edit]
[-] request-key.conf [edit]
[-] libuser.conf [edit]
[+] sgml
[+] imunify360
[-] e2fsck.conf [edit]
[-] mailcap [edit]
[-] exim.conf [edit]
[-] nscd.conf [edit]
[-] crontab [edit]
[-] vdpau_wrapper.cfg [edit]
[-] dracut.conf [edit]
[+] pulse
[-] p0fdisable [edit]
[-] nfs.conf [edit]
[+] pdns
[-] shadow [edit]
[+] pkcs11
[+] pure-ftpd
[-] senderverifybypasshosts [edit]
[-] userdomains [edit]
[-] cpsources.conf.plugins.example [edit]
[+] binfmt.d
[-] gshadow- [edit]
[-] antivirus.exim [edit]
[+] vfilters
[-] .pwd.lock [edit]
[-] named.root.key [edit]
[+] imunify-agent-proxy
[+] X11
[-] eximmailtrap [edit]
[+] chkconfig.d
[-] printcap [edit]
[-] userbwlimits [edit]
[+] audit
[-] fstab [edit]
[-] skipsmtpcheckhosts [edit]
[-] trustedmailhosts [edit]
[+] sasl2
[-] domainips [edit]
[-] issue [edit]
[+] rc5.d
[-] lock_manager_local.ini [edit]
[+] sysctl.d
[-] DIR_COLORS [edit]
[-] ftpd-ca.pem [edit]
[-] userdatadomains.json [edit]
[-] asound.conf [edit]
[-] mailbox_formats [edit]
[+] my.cnf.d
[-] group [edit]
[+] cron.d
[-] blocked_incoming_email_countries [edit]
[+] rc0.d
[-] DIR_COLORS.256color [edit]
[-] sudo-ldap.conf [edit]
[-] libaudit.conf [edit]
[+] snmp
[-] wwwacct.conf.shadow [edit]
[-] blocked_incoming_email_domains [edit]
[+] cpanel
[+] statetab.d
[-] wwwacct.conf [edit]
[-] .updated [edit]
[-] exim.pl.local [edit]
[-] host.conf [edit]
[-] suphp.conf [edit]
[+] chkserv.d
[-] cpspamd.conf [edit]
[+] ghostscript
[-] trusted-key.key [edit]
[+] sysconfig
[-] machine-id [edit]
[+] openldap
[-] domain_remote_mx_ips.cdb [edit]
[-] wgetrc [edit]
[-] webspam [edit]
[+] fastcomet
[-] passwd.cache [edit]
[-] hosts [edit]
[-] relayhosts [edit]
[+] popt.d
[-] .whostmgrft [edit]
[+] exports.d
[-] gshadow [edit]
[+] rwtab.d
[-] stats.conf [edit]
[+] dhcp
[-] papersize [edit]
[-] exim.conf.localopts [edit]
[-] adjtime [edit]
[-] exim_suspended_list [edit]
[+] prelink.conf.d
[+] mc
[+] named
[+] dracut.conf.d
[+] plymouth
[+] rc6.d
[+] depmod.d
[-] pure-ftpd.conf.rpmnew [edit]
[-] kdump.conf [edit]
[-] system-release-cpe [edit]
[-] ips [edit]
[+] yum
[-] hosts.allow [edit]
[+] sudoers.d
[+] groff
[+] cron.weekly
[+] scl
[-] sudoers [edit]
[-] exim.conf.dist [edit]
[+] valiases
[+] qemu-ga
[-] pure-ftpd.conf.i360bak [edit]
[-] named.conf.cache [edit]
[+] pm
[-] mail.rc [edit]
[-] nfsmount.conf [edit]
[-] remotedomains [edit]
[-] ethertypes [edit]
[+] ssl
[-] manualmx [edit]
[-] nsswitch.conf.rpmnew [edit]
[-] tcsd.conf [edit]
[-] GREP_COLORS [edit]
[-] services [edit]
[-] csh.cshrc [edit]
[-] exim.pl [edit]
[-] aliases.rpmnew [edit]
[+] fonts
[+] rpm
[-] demouids [edit]
[-] recent_authed_mail_ips_users [edit]
[+] yum.repos.d
[+] apache2
[+] csf
[+] smartmontools
[-] idmapd.conf [edit]
[-] shadow- [edit]
[-] man_db.conf [edit]
[-] hostname [edit]
[+] profile.d
[-] email_send_limits [edit]
[-] named.conf.zonedir.cache [edit]
[+] NetworkManager
[+] xdg
[-] logrotate.conf [edit]
[+] dpkg
[-] eximrejects.rpmorig [edit]
[-] motd [edit]
[+] opt
[+] gss
[-] localaliases [edit]
[-] neighbor_netblocks [edit]
[-] ftpd-rsa.pem [edit]
[-] wwwacct.conf.shadow.cache [edit]
[+] polkit-1
[+] bash_completion.d
[-] spammers [edit]
[-] resolv.conf [edit]
[+] proftpd
[-] subgid [edit]
[-] hosts.deny [edit]
[-] aliases [edit]
[+] cron.monthly
[-] cpanel_exim_system_filter [edit]
[-] whois.conf [edit]
[+] pam.d
[-] userips [edit]
[-] sysctl.conf [edit]
[-] csh.login [edit]
[+] bitninja
[-] inputrc [edit]
[+] iproute2
[+] openal
[-] trusted_mail_users [edit]
[-] localtime [edit]
[+] python
[-] GeoIP.conf [edit]
[-] exports [edit]
[+] libnl
[+] container
[-] passwd [edit]
[-] crypttab [edit]
[-] greylist_trusted_netblocks [edit]
[+] terminfo
[+] rc2.d
[-] mailhelo [edit]
[-] krb5.conf [edit]
[-] my.cnf [edit]
[+] systemd
[+] glvnd
[+] tuned
[+] gcrypt
[-] securetty [edit]
[-] named.conf [edit]
[-] pure-ftpd.conf [edit]
[-] .letsencrypt-cpanel-api-token [edit]
[-] demodomains [edit]
[-] exim.conf.mailman2.dist [edit]
[-] nocgiusers [edit]
[-] DIR_COLORS.lightbgcolor [edit]
[-] rsyslog.conf [edit]
[-] anacrontab [edit]
[-] recent_authed_mail_ips [edit]
[-] rwtab [edit]
[-] vimrc [edit]
[+] tmpfiles.d
[-] blocked_incoming_email_country_ips [edit]
[-] login.defs [edit]
[+] grub.d
[+] sw-engine
[-] ld.so.cache [edit]
[-] subuid [edit]
[-] ftpd-rsa-key.pem [edit]
[+] imunify360-webshield
[-] spammeripblocks [edit]
[-] ld.so.conf [edit]
[+] cl.selector
[+] security
[-] locale.conf [edit]
[+] rc3.d
[+] wpa_supplicant