ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / sbin

#!/bin/bash --norc
# New mkdumprd
#
# Copyright 2011 Red Hat, Inc.
#
# Written by Cong Wang <amwang@redhat.com>
#

. /lib/kdump/kdump-lib.sh
export IN_KDUMP=1

conf_file="/etc/kdump.conf"
SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa"
SAVE_PATH=$(grep ^path $conf_file| cut -d' '  -f2)
[ -z "$SAVE_PATH" ] && SAVE_PATH=$DEFAULT_PATH
# strip the duplicated "/"
SAVE_PATH=$(echo $SAVE_PATH | tr -s /)

is_wdt_addition_needed() {
	local active

is_wdt_mod_omitted
	[[ $? -eq 0 ]] && return 1
	[[ -d /sys/class/watchdog/ ]] || return 1
	for dir in /sys/class/watchdog/*; do
		[[ -f "$dir/state" ]] || continue
		active=$(< "$dir/state")
		[[ "$active" =  "active" ]] && return 0
	done
	return 1
}

WDTCFG=""
is_wdt_addition_needed
[[ $? -eq 0 ]] && WDTCFG="-a watchdog"

extra_modules=""
if has_hpwdt; then
	extra_modules=hpwdt
fi
dracut_args=("--quiet" "--hostonly" "--hostonly-cmdline" "--hostonly-i18n" "--hostonly-mode" "strict" "-o" "plymouth dash resume ifcfg" $WDTCFG)
OVERRIDE_RESETTABLE=0

add_dracut_arg() {
    local arg qarg is_quoted=0
    while [ $# -gt 0 ];
    do
        arg="${1//\'/\"}"
        #Handle quoted substring properly for passing it to dracut_args array.
        if [ $is_quoted -eq 0 ]; then
            if [[ "$arg" == "\"" ]] || [[ $arg != ${arg#\"} ]]; then
                is_quoted=1
                arg=${arg#\"}
            fi
        fi
        if [ $is_quoted -eq 1 ]; then
            qarg="$qarg $arg"
            if [[ "$arg" == "\"" ]] || [[ $arg != ${arg%\"} ]]; then
                is_quoted=0
                arg=${qarg%\"}
                qarg=""
            else
                shift
                continue
            fi
        fi
        dracut_args+=("$arg")
        shift
    done
}

add_dracut_module() {
    add_dracut_arg "--add" "$1"
}

add_dracut_mount() {
    add_dracut_arg "--mount" "$1"
}

add_dracut_sshkey() {
    add_dracut_arg "--sshkey" "$1"
}

# Generic substring function.  If $2 is in $1, return 0.
strstr() { [[ $1 =~ $2 ]]; }

# caller should ensure $1 is valid and mounted in 1st kernel
to_mount() {
    local _dev=$1 _source _target _fstype _options _mntopts _pdev

_source=$(findmnt -k -f -n -r -o SOURCE $_dev)
    _target=$(get_mntpoint_from_target $_dev)
    # mount under /sysroot if dump to root disk or mount under
    #/kdumproot/$_target in other cases in 2nd kernel. systemd
    #will be in charge to umount it.

if [ "$_target" = "/" ];then
        _target="/sysroot"
    else
        _target="/kdumproot/$_target"
    fi

_fstype=$(findmnt -k -f -n -r -o FSTYPE $_dev)
    [[ -e /etc/fstab ]] && _options=$(findmnt --fstab -f -n -r -o OPTIONS $_dev)
    [ -z "$_options" ] && _options=$(findmnt -k -f -n -r -o OPTIONS $_dev)
    # mount fs target as rw in 2nd kernel
    _options=$(echo $_options | sed 's/$^\|,$ro$$\|,$/\1rw\2/g')
    # with 'noauto' in fstab nfs and non-root disk mount will fail in 2nd
    # kernel, filter it out here.
    _options=$(echo $_options | sed 's/$^\|,$noauto$$\|,$/\1/g')
    # drop nofail or nobootwait
    _options=$(echo $_options | sed 's/$^\|,$nofail$$\|,$/\1/g')
    _options=$(echo $_options | sed 's/$^\|,$nobootwait$$\|,$/\1/g')

_mntopts="$_target $_fstype $_options"
    #for non-nfs _dev converting to use udev persistent name
    if [ -b "$_source" ]; then
        _pdev="$(kdump_get_persistent_dev $_source $_fstype)"
        if [ $? -ne 0 ]; then
            return 1
        fi

else
        _pdev=$_dev
    fi

echo "$_pdev $_mntopts"
}

is_readonly_mount() {
    local _mnt
    _mnt=$(findmnt -k -f -n -r -o OPTIONS $1)

#fs/proc_namespace.c: show_mountinfo():
    #seq_puts(m, mnt->mnt_flags & MNT_READONLY ? " ro" : " rw");
    [[ "$_mnt" =~ ^ro ]]
}

#Function: get_ssh_size
#$1=dump target
#called from while loop and shouldn't read from stdin, so we're using "ssh -n"
get_ssh_size() {
    local _opt _out _size
    _opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes"
    _out=$(ssh -q -n $_opt $1 "df -P $SAVE_PATH")
    [ $? -ne 0 ] && {
        perror_exit "checking remote ssh server available size failed."
    }

#ssh output removed the line break, so print field NF-2
    _size=$(echo -n $_out| awk '{avail=NF-2; print $avail}')
    echo -n $_size
}

#mkdir if save path does not exist on ssh dump target
#$1=ssh dump target
#caller should ensure write permission on $1:$SAVE_PATH
#called from while loop and shouldn't read from stdin, so we're using "ssh -n"
mkdir_save_path_ssh()
{
    local _opt _dir
    _opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes"
    ssh -qn $_opt $1 mkdir -p $SAVE_PATH 2>&1 > /dev/null
    _ret=$?
    if [ $_ret -ne 0 ]; then
        perror_exit "mkdir failed on $1:$SAVE_PATH"
    fi

#check whether user has write permission on $1:$SAVE_PATH
    _dir=$(ssh -qn $_opt $1 mktemp -dqp $SAVE_PATH 2>/dev/null)
    _ret=$?
    if [ $_ret -ne 0 ]; then
        perror_exit "Could not create temporary directory on $1:$SAVE_PATH. Make sure user has write permission on destination"
    fi
    ssh -qn $_opt $1 rmdir $_dir

return 0
}

#Function: get_fs_size
#$1=dump target
get_fs_size() {
    local _mnt=$(get_mntpoint_from_target $1)
    echo -n $(df -P "${_mnt}/$SAVE_PATH"|tail -1|awk '{print $4}')
}

#Function: get_raw_size
#$1=dump target
get_raw_size() {
        echo -n $(fdisk -s "$1")
}

#Function: check_size
#$1: dump type string ('raw', 'fs', 'ssh')
#$2: dump target
check_size() {
    local avail memtotal

memtotal=$(awk '/MemTotal/{print $2}' /proc/meminfo)
    case "$1" in
        raw)
            avail=$(get_raw_size "$2")
            ;;
        ssh)
            avail=$(get_ssh_size "$2")
            ;;
        fs)
            avail=$(get_fs_size "$2")
            ;;
        *)
            return
    esac

if [ $? -ne 0 ]; then
            perror_exit "Check dump target size failed"
    fi

if [ $avail -lt $memtotal ]; then
        echo "Warning: There might not be enough space to save a vmcore."
        echo "         The size of $2 should be greater than $memtotal kilo bytes."
    fi
}

# $1: core_collector config value
verify_core_collector() {
    if grep -q "^raw" $conf_file && [ "${1%% *}" != "makedumpfile" ]; then
        echo "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually."
    fi
    if is_ssh_dump_target || is_raw_dump_target; then
        if [ "${1%% *}" = "makedumpfile" ]; then
            ! strstr "$1" "-F" && {
                perror_exit "The specified dump target needs makedumpfile \"-F\" option."
            }
        fi
    fi
}

add_mount() {
    local _mnt=$(to_mount "$1")

if [ $? -ne 0 ]; then
        exit 1
    fi

add_dracut_mount "$_mnt"
}

# get_maj_min <device>
# Prints the major and minor of a device node.
# Example:
# $ get_maj_min /dev/sda2
# 8:2
get_maj_min() {
    local _dev
    _dev=$(stat -L -c '$((0x%t)):$((0x%T))' "$1" 2>/dev/null)
    _dev=$(eval "echo $_dev")
    echo $_dev
}

# ugly workaround for the lvm design
# There is no volume group device,
# so, there are no slave devices for volume groups.
# Logical volumes only have the slave devices they really live on,
# but you cannot create the logical volume without the volume group.
# And the volume group might be bigger than the devices the LV needs.
check_vol_slaves() {
    local _lv _vg _pv
    for i in /dev/mapper/*; do
        _lv=$(get_maj_min $i)
        if [[ $_lv = $2 ]]; then
            _vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
            # strip space
            _vg=$(echo $_vg)
            if [[ $_vg ]]; then
                for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null)
                do
                    check_block_and_slaves $1 $(get_maj_min $_pv) && return 0
                done
            fi
        fi
    done
    return 1
}

# Walk all the slave relationships for a given block device.
# Stop when our helper function returns success
# $1 = function to call on every found block device
# $2 = block device in major:minor format
check_block_and_slaves() {
    local _x
    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
    "$1" $2 && return
    check_vol_slaves "$@" && return 0
    if [[ -f /sys/dev/block/$2/../dev ]]; then
        check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") && return 0
    fi
    [[ -d /sys/dev/block/$2/slaves ]] || return 1
    for _x in /sys/dev/block/$2/slaves/*/dev; do
        [[ -f $_x ]] || continue
        check_block_and_slaves $1 $(cat "$_x") && return 0
    done
    return 1
}

#handle the case user does not specify the dump target explicitly
handle_default_dump_target()
{
    local _target
    local _mntpoint

is_user_configured_dump_target && return

check_save_path_fs $SAVE_PATH

_mntpoint=$(get_mntpoint_from_path $SAVE_PATH)
    _target=$(get_target_from_path $SAVE_PATH)

if is_atomic && is_bind_mount $_mntpoint; then
        SAVE_PATH=${SAVE_PATH##"$_mntpoint"}
        # the real dump path in the 2nd kernel, if the mount point is bind mounted.
        SAVE_PATH=$(get_bind_mount_directory $_mntpoint)/$SAVE_PATH
        _mntpoint=$(get_mntpoint_from_target $_target)

# the absolute path in the 1st kernel
        SAVE_PATH=$_mntpoint/$SAVE_PATH
    fi

SAVE_PATH=${SAVE_PATH##"$_mntpoint"}
    add_mount "$_target"
    check_size fs $_target
}

get_override_resettable()
{
    local override_resettable

override_resettable=$(grep "^override_resettable" $conf_file)
    if [ -n "$override_resettable" ]; then
        OVERRIDE_RESETTABLE=$(echo $override_resettable | cut -d' '  -f2)
        if [ "$OVERRIDE_RESETTABLE" != "0" ] && [ "$OVERRIDE_RESETTABLE" != "1" ];then
            perror_exit "override_resettable value $OVERRIDE_RESETTABLE is invalid"
        fi
    fi
}

# $1: function name
for_each_block_target()
{
    local dev majmin

for dev in $(get_kdump_targets); do
        [ -b "$dev" ] || continue
        majmin=$(get_maj_min $dev)
        check_block_and_slaves $1 $majmin && return 1
    done

return 0
}

#judge if a specific device with $1 is unresettable
#return false if unresettable.
is_unresettable()
{
    local path="/sys/$(udevadm info --query=all --path=/sys/dev/block/$1 | awk '/^P:/ {print $2}' | sed -e 's/$cciss[0-9]\+\/$.*/\1/g' -e 's/\/block\/.*$//')/resettable"
    local resettable=1

if [ -f "$path" ]
    then
        resettable="$(cat $path)"
        [ $resettable -eq 0 -a "$OVERRIDE_RESETTABLE" -eq 0 ] && {
            local device=$(udevadm info --query=all --path=/sys/dev/block/$1 | awk -F= '/DEVNAME/{print $2}')
            echo "Error: Can not save vmcore because device $device is unresettable"
            return 0
        }
    fi

return 1
}

#check if machine is resettable.
#return true if resettable
check_resettable()
{
    local _ret _target

get_override_resettable

for_each_block_target is_unresettable
    _ret=$?

[ $_ret -eq 0 ] && return

return 1
}

# $1: maj:min
is_crypt()
{
    local majmin=$1 dev line ID_FS_TYPE=""

line=$(udevadm info --query=property --path=/sys/dev/block/$majmin \
            | grep "^ID_FS_TYPE")
    eval "$line"
    [[ "$ID_FS_TYPE" = "crypto_LUKS" ]] && {
        dev=$(udevadm info --query=all --path=/sys/dev/block/$majmin | awk -F= '/DEVNAME/{print $2}')
        echo "Device $dev is encrypted."
        return 0
    }
    return 1
}

check_crypt()
{
    local _ret _target

for_each_block_target is_crypt
    _ret=$?

[ $_ret -eq 0 ] && return

return 1
}

if ! check_resettable; then
    exit 1
fi

if ! check_crypt; then
    echo "Warning: Encrypted device is in dump path. User will prompted for password during second kernel boot."
fi

# firstly get right SSH_KEY_LOCATION
keyfile=$(awk '/^sshkey/ {print $2}' $conf_file)
if [ -f "$keyfile" ]; then
    # canonicalize the path
    SSH_KEY_LOCATION=$(/usr/bin/readlink -m $keyfile)
fi

if [ "$(uname -m)" = "s390x" ]; then
    add_dracut_module "znet"
fi

while read config_opt config_val;
do
    # remove inline comments after the end of a directive.
    case "$config_opt" in
    extra_modules)
        extra_modules="$extra_modules $config_val"
        ;;
    ext[234]|xfs|btrfs|minix|nfs)
        if ! findmnt $config_val >/dev/null; then
            perror_exit "Dump target $config_val is probably not mounted."
        fi

_absolute_save_path=$(make_absolute_save_path $config_val)
        _mntpoint=$(get_mntpoint_from_path $_absolute_save_path)
        if is_atomic && is_bind_mount $_mntpoint; then
            SAVE_PATH=${_absolute_save_path##"$_mntpoint"}
            # the real dump path in the 2nd kernel, if the mount point is bind mounted.
            SAVE_PATH=$(get_bind_mount_directory $_mntpoint)/$SAVE_PATH
        fi

add_mount "$config_val"
        check_save_path_fs $_absolute_save_path
        check_size fs $config_val
        ;;
    raw)
        #checking raw disk writable
        dd if=$config_val count=1 of=/dev/null > /dev/null 2>&1 || {
            perror_exit "Bad raw disk $config_val"
        }
        _praw=$(kdump_get_persistent_dev $config_val "raw")
        if [ $? -ne 0 ]; then
            exit 1
        fi
        add_dracut_arg "--device" "$_praw"
        check_size raw $config_val
        ;;
    ssh)
        if strstr "$config_val" "@";
        then
            check_size ssh $config_val
            mkdir_save_path_ssh $config_val
            add_dracut_module "ssh-client"
		add_dracut_sshkey "$SSH_KEY_LOCATION"
        else
            perror_exit "Bad ssh dump target $config_val"
        fi
        ;;
    core_collector)
        verify_core_collector "$config_val"
        ;;
    dracut_args)
        add_dracut_arg $config_val
        ;;
    *)
        ;;
    esac
done <<< "$(read_strip_comments $conf_file)"

handle_default_dump_target

if [ -n "$extra_modules" ]
then
    add_dracut_arg "--add-drivers" "$extra_modules"
fi

if ! is_fadump_capable; then
    # The 2nd rootfs mount stays behind the normal dump target mount,
    # so it doesn't affect the logic of check_dump_fs_modified().
    is_dump_to_rootfs && add_mount "$(to_dev_name $(get_root_fs_device))"

add_dracut_arg "--no-hostonly-default-device"
fi

dracut "${dracut_args[@]}" "$@"
_rc=$?
sync
exit $_rc

[+] ..
[-] poweroff [edit]
[-] sulogin [edit]
[-] ppp-watch [edit]
[-] addpart [edit]
[-] kpartx [edit]
[-] tcsd [edit]
[-] rsyslogd [edit]
[-] xfs_freeze [edit]
[-] selinuxconlist [edit]
[-] sendmail_bitninja [edit]
[-] nl-qdisc-add [edit]
[-] dnssec-coverage [edit]
[-] btrfs [edit]
[-] genrandom [edit]
[-] lsmod [edit]
[-] readprofile [edit]
[-] suexec [edit]
[-] blkdeactivate [edit]
[-] usermod [edit]
[-] nl-link-list [edit]
[-] mkdict [edit]
[-] xtables-multi [edit]
[-] rndc [edit]
[-] fsck.btrfs [edit]
[-] init [edit]
[-] service [edit]
[-] saslauthd [edit]
[-] tcpdump [edit]
[-] dovecot [edit]
[-] rndc-confgen [edit]
[-] fsck.ext2 [edit]
[-] nfsstat [edit]
[-] routef [edit]
[-] xfs_rtcp [edit]
[-] rtmon [edit]
[-] ddns-confgen [edit]
[-] dovecot_cpshutdown [edit]
[-] vigr [edit]
[-] e4defrag [edit]
[-] pure-authd [edit]
[-] showmount [edit]
[-] eapol_test [edit]
[-] biosdecode [edit]
[-] yumdb [edit]
[-] depmod [edit]
[-] ctstat [edit]
[-] dracut [edit]
[-] xfs_copy [edit]
[-] genl-ctrl-list [edit]
[-] pwconv [edit]
[-] selabel_partial_match [edit]
[-] iotop [edit]
[-] arp-scan [edit]
[-] iptables [edit]
[-] gssproxy [edit]
[-] exim_lock [edit]
[-] tsig-keygen [edit]
[-] pure-config.pl [edit]
[-] firewalld [edit]
[-] debugfs [edit]
[-] ifenslave [edit]
[-] e2freefrag [edit]
[-] auditd [edit]
[-] mkfs.ext3 [edit]
[-] tracepath [edit]
[-] findfs [edit]
[-] quotaon [edit]
[-] rpc.mountd [edit]
[-] fcgistarter [edit]
[-] capsh [edit]
[-] atopacctd [edit]
[-] update-smart-drivedb [edit]
[-] selabel_digest [edit]
[-] lusermod [edit]
[-] bitninjacli-interactive [edit]
[-] setquota [edit]
[-] nl-cls-list [edit]
[-] tune2fs [edit]
[-] edquota [edit]
[-] pure-certd [edit]
[-] dnssec-revoke [edit]
[-] xfs_fsr [edit]
[-] exigrep [edit]
[-] mke2fs [edit]
[-] new-kernel-pkg [edit]
[-] rpc.statd [edit]
[-] ebtables-restore [edit]
[-] nsec3hash [edit]
[-] shutdown [edit]
[-] mii-tool [edit]
[-] audispd-zos-remote [edit]
[-] atrun [edit]
[-] sestatus [edit]
[-] sushell [edit]
[-] btrfs-zero-log [edit]
[-] nstat [edit]
[-] grub2-setpassword [edit]
[-] newusers [edit]
[-] setsebool [edit]
[-] grub2-rpm-sort [edit]
[-] dnssec-settime [edit]
[-] iptunnel [edit]
[-] luseradd [edit]
[-] rtcwake [edit]
[-] btrfs-map-logical [edit]
[-] rdma [edit]
[-] mkfs.ext2 [edit]
[-] webmitm [edit]
[-] iptables-restore [edit]
[-] ldattach [edit]
[-] route [edit]
[-] rpc.nfsd [edit]
[-] iprinit [edit]
[-] quotaoff [edit]
[-] ctrlaltdel [edit]
[-] create-cracklib-dict [edit]
[-] hwclock [edit]
[-] augenrules [edit]
[-] named-checkconf [edit]
[-] smartctl [edit]
[-] iprupdate [edit]
[-] installkernel [edit]
[-] fsck.ext4 [edit]
[-] load_policy [edit]
[-] convertquota [edit]
[-] auditctl [edit]
[-] luserdel [edit]
[-] plipconfig [edit]
[-] agetty [edit]
[-] sshd [edit]
[-] unix_update [edit]
[-] sys-unconfig [edit]
[-] bitninja-config [edit]
[-] ping6 [edit]
[-] ifup [edit]
[-] virt-what [edit]
[-] dmstats [edit]
[-] quotastats [edit]
[-] pluginviewer [edit]
[-] modsec-sdbm-util [edit]
[-] cracklib-unpacker [edit]
[-] kexec [edit]
[-] crond [edit]
[-] dnssec-keymgr [edit]
[-] pure-ftpwho [edit]
[-] selinux_restorecon [edit]
[-] grpck [edit]
[-] partx [edit]
[-] fdformat [edit]
[-] eximstats [edit]
[-] plymouthd [edit]
[-] slattach [edit]
[-] genl [edit]
[-] tcpslice [edit]
[-] arpspoof [edit]
[-] glibc_post_upgrade.x86_64 [edit]
[-] lgroupdel [edit]
[-] iconvconfig.x86_64 [edit]
[-] sm-notify [edit]
[-] dmsetup [edit]
[-] msgsnarf [edit]
[-] blkmapd [edit]
[-] ip [edit]
[-] getenforce [edit]
[-] nologin [edit]
[-] hardlink [edit]
[-] pwck [edit]
[-] authconfig-tui [edit]
[-] btrfsck [edit]
[-] safe_finger [edit]
[-] grpconv [edit]
[-] sln [edit]
[-] wipefs [edit]
[-] blockdev [edit]
[-] testsaslauthd [edit]
[-] sasldblistusers2 [edit]
[-] dsniff [edit]
[-] dnssec-checkds [edit]
[-] key.dns_resolver [edit]
[-] htcacheclean [edit]
[-] osd_login [edit]
[-] lid [edit]
[-] nl-class-delete [edit]
[-] mkfs.ext4 [edit]
[-] alternatives [edit]
[-] tcpd [edit]
[-] httpd [edit]
[-] tcpnice [edit]
[-] mount.nfs4 [edit]
[-] mkfs.xfs [edit]
[-] e2undo [edit]
[-] sshow [edit]
[-] selabel_lookup [edit]
[-] chkconfig [edit]
[-] selinuxenabled [edit]
[-] xfs_repair [edit]
[-] chcpu [edit]
[-] grub2-reboot [edit]
[-] nl-class-add [edit]
[-] mailsnarf [edit]
[-] ebtables [edit]
[-] tuned-adm [edit]
[-] runq [edit]
[-] autrace [edit]
[-] getsebool [edit]
[-] cfdisk [edit]
[-] rtacct [edit]
[-] dhclient [edit]
[-] sim_server [edit]
[-] wpa_passphrase [edit]
[-] rpcdebug [edit]
[-] exim [edit]
[-] cracklib-check [edit]
[-] lshw [edit]
[-] sshd-keygen [edit]
[-] netreport [edit]
[-] rpcinfo [edit]
[-] xfs_io [edit]
[-] ifcfg [edit]
[-] grpunconv [edit]
[-] xfs_ncheck [edit]
[-] quot [edit]
[-] fsck.minix [edit]
[-] try-from [edit]
[-] ifstat [edit]
[-] plymouth-set-default-theme [edit]
[-] t1libconfig [edit]
[-] modprobe [edit]
[-] mkfs [edit]
[-] semanage [edit]
[-] fixfiles [edit]
[-] iprdump [edit]
[-] lfd [edit]
[-] pure-ftpd [edit]
[-] lgroupmod [edit]
[-] unix_chkpwd [edit]
[-] btrfs-image [edit]
[-] addgnupghome [edit]
[-] dumpe2fs [edit]
[-] partprobe [edit]
[-] grub2-macbless [edit]
[-] mkfs.btrfs [edit]
[-] groupdel [edit]
[-] mklost+found [edit]
[-] snmpd [edit]
[-] ifconfig [edit]
[-] request-key [edit]
[-] lsof [edit]
[-] suphp [edit]
[-] switch_root [edit]
[-] grub2-get-kernel-settings [edit]
[-] iptables-save [edit]
[-] zramctl [edit]
[-] named-compilezone [edit]
[-] sendmail [edit]
[-] grub2-ofpathname [edit]
[-] parted [edit]
[-] sysctl [edit]
[-] fstrim [edit]
[-] ip6tables [edit]
[-] dmfilemapd [edit]
[-] fsck.ext3 [edit]
[-] ether-wake [edit]
[-] authconfig [edit]
[-] urlsnarf [edit]
[-] blkid [edit]
[-] sefcontext_compile [edit]
[-] swapon [edit]
[-] resizepart [edit]
[-] dnssec-importkey [edit]
[-] exinext [edit]
[-] zic [edit]
[-] e2fsck [edit]
[-] xfs_admin [edit]
[-] vpddecode [edit]
[-] imunify-notifier [edit]
[-] mysqld [edit]
[-] chgpasswd [edit]
[-] halt [edit]
[-] iprconfig [edit]
[-] vipw [edit]
[-] sshmitm [edit]
[-] exim_checkaccess [edit]
[-] losetup [edit]
[-] xfs_info [edit]
[-] arping [edit]
[-] cracklib-format [edit]
[-] exicyclog [edit]
[-] whmapi1 [edit]
[-] bitninjacli [edit]
[-] rtpr [edit]
[-] modinfo [edit]
[-] iprsos [edit]
[-] accessdb [edit]
[-] start-statd [edit]
[-] nl-pktloc-lookup [edit]
[-] xfs_estimate [edit]
[-] tcpdmatch [edit]
[-] swapoff [edit]
[-] grub2-bios-setup [edit]
[-] rmmod [edit]
[-] genhostid [edit]
[-] lnstat [edit]
[-] ipmaddr [edit]
[-] grub2-set-default [edit]
[-] mii-diag [edit]
[-] webspy [edit]
[-] btrfs-select-super [edit]
[-] ausearch [edit]
[-] bridge [edit]
[-] nl-qdisc-delete [edit]
[-] xfs_logprint [edit]
[-] wpa_cli [edit]
[-] genhomedircon [edit]
[-] dnssec-keyfromlabel [edit]
[-] mountstats [edit]
[-] nl-cls-add [edit]
[-] mtr [edit]
[-] selabel_lookup_best_match [edit]
[-] arp-fingerprint [edit]
[-] btrfs-convert [edit]
[-] uuserver [edit]
[-] cbq [edit]
[-] getcap [edit]
[-] pam_tally2 [edit]
[-] sw-engine-fpm [edit]
[-] pam_timestamp_check [edit]
[-] restorecon [edit]
[-] mkfs.cramfs [edit]
[-] runlevel [edit]
[-] logrotate [edit]
[-] exim_fixdb [edit]
[-] audispd [edit]
[-] avcstat [edit]
[-] fuser [edit]
[-] nfsidmap [edit]
[-] pure-quotacheck [edit]
[-] ip6tables-save [edit]
[-] usernetctl [edit]
[-] exim_tidydb [edit]
[-] mount.nfs [edit]
[-] audisp-remote [edit]
[-] getpcaps [edit]
[-] cacertdir_rehash [edit]
[-] named [edit]
[-] exim_dbmbuild [edit]
[-] anacron [edit]
[-] xfs_db [edit]
[-] grub2-install [edit]
[-] start-stop-daemon [edit]
[-] pidof [edit]
[-] paperconfig [edit]
[-] irqbalance [edit]
[-] dnssec-dsfromkey [edit]
[-] check_forensic [edit]
[-] fxload [edit]
[-] pwhistory_helper [edit]
[-] blkdiscard [edit]
[-] lwresd [edit]
[-] tc [edit]
[-] setcap [edit]
[-] reboot [edit]
[-] xfs_mkfile [edit]
[-] btrfstune [edit]
[-] logsave [edit]
[-] insmod [edit]
[-] mkhomedir_helper [edit]
[-] fsfreeze [edit]
[-] badblocks [edit]
[-] tmpwatch [edit]
[-] groupadd [edit]
[-] rotatelogs [edit]
[-] mkdumprd [edit]
[-] makedumpfile [edit]
[-] matchpathcon [edit]
[-] ipset [edit]
[-] runuser [edit]
[-] telinit [edit]
[-] build-locale-archive [edit]
[-] rdisc [edit]
[-] packer [edit]
[-] biosdevname [edit]
[-] csf [edit]
[-] nameif [edit]
[-] xfs_metadump [edit]
[-] fsck [edit]
[-] whmapi0 [edit]
[-] routel [edit]
[-] rpc.rquotad [edit]
[-] umount.nfs [edit]
[-] exiqsumm [edit]
[-] sasl2-shared-mechlist [edit]
[-] NetworkManager [edit]
[-] udevadm [edit]
[-] tcpkill [edit]
[-] mkswap [edit]
[-] fsck.cramfs [edit]
[-] macof [edit]
[-] pam_console_apply [edit]
[-] clockdiff [edit]
[-] clock [edit]
[-] mysqld-debug [edit]
[-] ip6tables-restore [edit]
[-] nfsdcltrack [edit]
[-] filesnarf [edit]
[-] umount.nfs4 [edit]
[-] fdisk [edit]
[-] xfs_bmap [edit]
[-] useradd [edit]
[-] nl-qdisc-list [edit]
[-] devlink [edit]
[-] xfs_growfs [edit]
[-] ebtables-save [edit]
[-] quotacheck [edit]
[-] yum-complete-transaction [edit]
[-] pdns_server [edit]
[-] visudo [edit]
[-] lgroupadd [edit]
[-] aureport [edit]
[-] chpasswd [edit]
[-] filefrag [edit]
[-] ifdown [edit]
[-] grub2-sparc64-setup [edit]
[-] btrfs-debug-tree [edit]
[-] dhclient-script [edit]
[-] nl-class-list [edit]
[-] nfsiostat [edit]
[-] pure-mrtginfo [edit]
[-] faillock [edit]
[-] nl-classid-lookup [edit]
[-] adduser [edit]
[-] named-checkzone [edit]
[-] resize2fs [edit]
[-] get-oui [edit]
[-] get-iab [edit]
[-] exim_dumpdb [edit]
[-] nscd [edit]
[-] ldconfig [edit]
[-] setenforce [edit]
[-] pivot_root [edit]
[-] iconvconfig [edit]
[-] lchage [edit]
[-] exiqgrep [edit]
[-] groupmod [edit]
[-] snmptrapd [edit]
[-] dnssec-signzone [edit]
[-] smartd [edit]
[-] dnsspoof [edit]
[-] gss-server [edit]
[-] rpcbind [edit]
[-] xqmstats [edit]
[-] selinuxdefcon [edit]
[-] e2image [edit]
[-] selinuxexeccon [edit]
[-] rpc.gssd [edit]
[-] semodule [edit]
[-] xfs_mdrestore [edit]
[-] sfdisk [edit]
[-] cracklib-packer [edit]
[-] lnewusers [edit]
[-] exiwhat [edit]
[-] grub2-mkconfig [edit]
[-] tuned [edit]
[-] ownership [edit]
[-] lpasswd [edit]
[-] install-info [edit]
[-] e2label [edit]
[-] dnssec-verify [edit]
[-] apachectl [edit]
[-] rtstat [edit]
[-] ethtool [edit]
[-] tracepath6 [edit]
[-] atd [edit]
[-] iprdbg [edit]
[-] userdel [edit]
[-] applygnupgdefaults [edit]
[-] whmlogin [edit]
[-] arp [edit]
[-] swaplabel [edit]
[-] isc-hmac-fixup [edit]
[-] weak-modules [edit]
[-] mkfs.minix [edit]
[-] exportfs [edit]
[-] dnssec-keygen [edit]
[-] xfs_quota [edit]
[-] rpc.idmapd [edit]
[-] nl-cls-delete [edit]
[-] zdump [edit]
[-] grubby [edit]
[-] saslpasswd2 [edit]
[-] fsck.xfs [edit]
[-] named-journalprint [edit]
[-] delpart [edit]
[-] vmcore-dmesg [edit]
[-] consoletype [edit]
[-] groupmems [edit]
[-] killall5 [edit]
[-] update-alternatives [edit]
[-] grub2-probe [edit]
[-] setfiles [edit]
[-] pure-uploadscript [edit]
[-] arpd [edit]
[-] repquota [edit]
[-] btrfs-find-root [edit]
[-] dmidecode [edit]
[-] pwunconv [edit]
[-] chroot [edit]
[-] wpa_supplicant [edit]
[-] ss [edit]