ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / include / linux

/*
 * include/linux/tipc_config.h: Include file for TIPC configuration interface
 *
 * Copyright (c) 2003-2006, Ericsson AB
 * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the names of the copyright holders nor the names of its
 *    contributors may be used to endorse or promote products derived from
 *    this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _LINUX_TIPC_CONFIG_H_
#define _LINUX_TIPC_CONFIG_H_

#include <linux/types.h>
#include <linux/string.h>
#include <asm/byteorder.h>

#include <arpa/inet.h> /* for ntohs etc. */

/*
 * Configuration
 *
 * All configuration management messaging involves sending a request message
 * to the TIPC configuration service on a node, which sends a reply message
 * back.  (In the future multi-message replies may be supported.)
 *
 * Both request and reply messages consist of a transport header and payload.
 * The transport header contains info about the desired operation;
 * the payload consists of zero or more type/length/value (TLV) items
 * which specify parameters or results for the operation.
 *
 * For many operations, the request and reply messages have a fixed number
 * of TLVs (usually zero or one); however, some reply messages may return
 * a variable number of TLVs.  A failed request is denoted by the presence
 * of an "error string" TLV in the reply message instead of the TLV(s) the
 * reply should contain if the request succeeds.
 */

/*
 * Public commands:
 * May be issued by any process.
 * Accepted by own node, or by remote node only if remote management enabled.
 */

#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
#define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
#define  TIPC_CMD_GET_LINKS         0x0004    /* tx net_addr, rx link_info(s) */
#define  TIPC_CMD_SHOW_NAME_TABLE   0x0005    /* tx name_tbl_query, rx ultra_string */
#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
#define  TIPC_CMD_SHOW_LINK_STATS   0x000B    /* tx link_name, rx ultra_string */
#define  TIPC_CMD_SHOW_STATS        0x000F    /* tx unsigned, rx ultra_string */

/*
 * Protected commands:
 * May only be issued by "network administration capable" process.
 * Accepted by own node, or by remote node only if remote management enabled
 * and this node is zone manager.
 */

#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
#define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* obsoleted */
#define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* obsoleted */
#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* obsoleted */
#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* obsoleted */
#define  TIPC_CMD_GET_MAX_NODES     0x4009    /* obsoleted */
#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* obsoleted */
#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */

#define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
#define  TIPC_CMD_DISABLE_BEARER    0x4102    /* tx bearer_name, rx none */
#define  TIPC_CMD_SET_LINK_TOL      0x4107    /* tx link_config, rx none */
#define  TIPC_CMD_SET_LINK_PRI      0x4108    /* tx link_config, rx none */
#define  TIPC_CMD_SET_LINK_WINDOW   0x4109    /* tx link_config, rx none */
#define  TIPC_CMD_SET_LOG_SIZE      0x410A    /* obsoleted */
#define  TIPC_CMD_DUMP_LOG          0x410B    /* obsoleted */
#define  TIPC_CMD_RESET_LINK_STATS  0x410C    /* tx link_name, rx none */

/*
 * Private commands:
 * May only be issued by "network administration capable" process.
 * Accepted by own node only; cannot be used on a remote node.
 */

#define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
#define  TIPC_CMD_SET_REMOTE_MNG    0x8003    /* tx unsigned, rx none */
#define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
#define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* obsoleted */
#define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* obsoleted */
#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* obsoleted */
#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* obsoleted */
#define  TIPC_CMD_SET_MAX_NODES     0x8009    /* obsoleted */
#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* obsoleted */
#define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */

/*
 * Reserved commands:
 * May not be issued by any process.
 * Used internally by TIPC.
 */

#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */

/*
 * TLV types defined for TIPC
 */

#define TIPC_TLV_NONE		0	/* no TLV present */
#define TIPC_TLV_VOID		1	/* empty TLV (0 data bytes)*/
#define TIPC_TLV_UNSIGNED	2	/* 32-bit integer */
#define TIPC_TLV_STRING		3	/* char[128] (max) */
#define TIPC_TLV_LARGE_STRING	4	/* char[2048] (max) */
#define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */

#define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
#define TIPC_TLV_NET_ADDR	17	/* 32-bit integer denoting <Z.C.N> */
#define TIPC_TLV_MEDIA_NAME	18	/* char[TIPC_MAX_MEDIA_NAME] */
#define TIPC_TLV_BEARER_NAME	19	/* char[TIPC_MAX_BEARER_NAME] */
#define TIPC_TLV_LINK_NAME	20	/* char[TIPC_MAX_LINK_NAME] */
#define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
#define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
#define TIPC_TLV_BEARER_CONFIG	23	/* struct tipc_bearer_config */
#define TIPC_TLV_LINK_CONFIG	24	/* struct tipc_link_config */
#define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
#define TIPC_TLV_PORT_REF	26	/* 32-bit port reference */

/*
 * Maximum sizes of TIPC bearer-related names (including terminating NUL)
 */

#define TIPC_MAX_MEDIA_NAME	16	/* format = media */
#define TIPC_MAX_IF_NAME	16	/* format = interface */
#define TIPC_MAX_BEARER_NAME	32	/* format = media:interface */
#define TIPC_MAX_LINK_NAME	60	/* format = Z.C.N:interface-Z.C.N:interface */

/*
 * Link priority limits (min, default, max, media default)
 */

#define TIPC_MIN_LINK_PRI	0
#define TIPC_DEF_LINK_PRI	10
#define TIPC_MAX_LINK_PRI	31
#define TIPC_MEDIA_LINK_PRI	(TIPC_MAX_LINK_PRI + 1)

/*
 * Link tolerance limits (min, default, max), in ms
 */

#define TIPC_MIN_LINK_TOL 50
#define TIPC_DEF_LINK_TOL 1500
#define TIPC_MAX_LINK_TOL 30000

#if (TIPC_MIN_LINK_TOL < 16)
#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
#endif

/*
 * Link window limits (min, default, max), in packets
 */

#define TIPC_MIN_LINK_WIN 16
#define TIPC_DEF_LINK_WIN 50
#define TIPC_MAX_LINK_WIN 150

struct tipc_node_info {
	__be32 addr;			/* network address of node */
	__be32 up;			/* 0=down, 1= up */
};

struct tipc_link_info {
	__be32 dest;			/* network address of peer node */
	__be32 up;			/* 0=down, 1=up */
	char str[TIPC_MAX_LINK_NAME];	/* link name */
};

struct tipc_bearer_config {
	__be32 priority;		/* Range [1,31]. Override per link  */
	__be32 disc_domain;		/* <Z.C.N> describing desired nodes */
	char name[TIPC_MAX_BEARER_NAME];
};

struct tipc_link_config {
	__be32 value;
	char name[TIPC_MAX_LINK_NAME];
};

#define TIPC_NTQ_ALLTYPES 0x80000000

struct tipc_name_table_query {
	__be32 depth;	/* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
	__be32 type;	/* {t,l,u} info ignored if high bit of "depth" is set */
	__be32 lowbound; /* (i.e. displays all entries of name table) */
	__be32 upbound;
};

/*
 * The error string TLV is a null-terminated string describing the cause
 * of the request failure.  To simplify error processing (and to save space)
 * the first character of the string can be a special error code character
 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
 */

#define TIPC_CFG_TLV_ERROR      "\x80"  /* request contains incorrect TLV(s) */
#define TIPC_CFG_NOT_NET_ADMIN  "\x81"	/* must be network administrator */
#define TIPC_CFG_NOT_ZONE_MSTR	"\x82"	/* must be zone master */
#define TIPC_CFG_NO_REMOTE	"\x83"	/* remote management not enabled */
#define TIPC_CFG_NOT_SUPPORTED  "\x84"	/* request is not supported by TIPC */
#define TIPC_CFG_INVALID_VALUE  "\x85"  /* request has invalid argument value */

/*
 * A TLV consists of a descriptor, followed by the TLV value.
 * TLV descriptor fields are stored in network byte order;
 * TLV values must also be stored in network byte order (where applicable).
 * TLV descriptors must be aligned to addresses which are multiple of 4,
 * so up to 3 bytes of padding may exist at the end of the TLV value area.
 * There must not be any padding between the TLV descriptor and its value.
 */

struct tlv_desc {
	__be16 tlv_len;		/* TLV length (descriptor + value) */
	__be16 tlv_type;		/* TLV identifier */
};

#define TLV_ALIGNTO 4

#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))

static __inline__ int TLV_OK(const void *tlv, __u16 space)
{
	/*
	 * Would also like to check that "tlv" is a multiple of 4,
	 * but don't know how to do this in a portable way.
	 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
	 *   won't allow binary "&" with a pointer.
	 * - Tried casting "tlv" to integer type, but causes warning about size
	 *   mismatch when pointer is bigger than chosen type (int, long, ...).
	 */

return (space >= TLV_SPACE(0)) &&
		(ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
}

static __inline__ int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
{
	return TLV_OK(tlv, space) &&
		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
}

static __inline__ int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
{
	struct tlv_desc *tlv_ptr;
	int tlv_len;

tlv_len = TLV_LENGTH(len);
	tlv_ptr = (struct tlv_desc *)tlv;
	tlv_ptr->tlv_type = htons(type);
	tlv_ptr->tlv_len  = htons(tlv_len);
	if (len && data)
		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
	return TLV_SPACE(len);
}

/*
 * A TLV list descriptor simplifies processing of messages
 * containing multiple TLVs.
 */

struct tlv_list_desc {
	struct tlv_desc *tlv_ptr;	/* ptr to current TLV */
	__u32 tlv_space;		/* # bytes from curr TLV to list end */
};

static __inline__ void TLV_LIST_INIT(struct tlv_list_desc *list,
				 void *data, __u32 space)
{
	list->tlv_ptr = (struct tlv_desc *)data;
	list->tlv_space = space;
}

static __inline__ int TLV_LIST_EMPTY(struct tlv_list_desc *list)
{
	return (list->tlv_space == 0);
}

static __inline__ int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
{
	return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
}

static __inline__ void *TLV_LIST_DATA(struct tlv_list_desc *list)
{
	return TLV_DATA(list->tlv_ptr);
}

static __inline__ void TLV_LIST_STEP(struct tlv_list_desc *list)
{
	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));

list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
	list->tlv_space -= tlv_space;
}

/*
 * Configuration messages exchanged via NETLINK_GENERIC use the following
 * family id, name, version and command.
 */
#define TIPC_GENL_NAME		"TIPC"
#define TIPC_GENL_VERSION	0x1
#define TIPC_GENL_CMD		0x1

/*
 * TIPC specific header used in NETLINK_GENERIC requests.
 */
struct tipc_genlmsghdr {
	__u32 dest;		/* Destination address */
	__u16 cmd;		/* Command */
	__u16 reserved;		/* Unused */
};

#define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))

/*
 * Configuration messages exchanged via TIPC sockets use the TIPC configuration
 * message header, which is defined below.  This structure is analogous
 * to the Netlink message header, but fields are stored in network byte order
 * and no padding is permitted between the header and the message data
 * that follows.
 */

struct tipc_cfg_msg_hdr {
	__be32 tcm_len;		/* Message length (including header) */
	__be16 tcm_type;	/* Command type */
	__be16 tcm_flags;	/* Additional flags */
	char  tcm_reserved[8];	/* Unused */
};

#define TCM_F_REQUEST	0x1	/* Flag: Request message */
#define TCM_F_MORE	0x2	/* Flag: Message to be continued */

#define TCM_ALIGN(datalen)  (((datalen)+3) & ~3)
#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
#define TCM_SPACE(datalen)  (TCM_ALIGN(TCM_LENGTH(datalen)))
#define TCM_DATA(tcm_hdr)   ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))

static __inline__ int TCM_SET(void *msg, __u16 cmd, __u16 flags,
			  void *data, __u16 data_len)
{
	struct tipc_cfg_msg_hdr *tcm_hdr;
	int msg_len;

msg_len = TCM_LENGTH(data_len);
	tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
	tcm_hdr->tcm_len   = htonl(msg_len);
	tcm_hdr->tcm_type  = htons(cmd);
	tcm_hdr->tcm_flags = htons(flags);
	if (data_len && data)
		memcpy(TCM_DATA(msg), data, data_len);
	return TCM_SPACE(data_len);
}

#endif

[+] ..
[-] sysinfo.h [edit]
[-] mroute.h [edit]
[-] if_eql.h [edit]
[-] serial_core.h [edit]
[-] membarrier.h [edit]
[-] sched.h [edit]
[-] mei.h [edit]
[-] bfs_fs.h [edit]
[-] atmlec.h [edit]
[-] v4l2-mediabus.h [edit]
[-] videodev2.h [edit]
[-] screen_info.h [edit]
[-] if_slip.h [edit]
[-] uuid.h [edit]
[-] version.h [edit]
[-] ipv6_route.h [edit]
[-] ixjuser.h [edit]
[-] pkt_cls.h [edit]
[-] atm_he.h [edit]
[-] raw.h [edit]
[-] msdos_fs.h [edit]
[-] mman.h [edit]
[-] aio_abi.h [edit]
[-] reboot.h [edit]
[-] snmp.h [edit]
[-] atm_eni.h [edit]
[-] netfilter_bridge.h [edit]
[-] patchkey.h [edit]
[-] string.h [edit]
[-] socket.h [edit]
[+] spi
[-] auxvec.h [edit]
[-] sockios.h [edit]
[-] keyboard.h [edit]
[-] scc.h [edit]
[-] dn.h [edit]
[-] unistd.h [edit]
[-] oom.h [edit]
[-] pkt_sched.h [edit]
[-] if_phonet.h [edit]
[+] byteorder
[-] if_arcnet.h [edit]
[+] caif
[-] fd.h [edit]
[-] radeonfb.h [edit]
[-] qnx4_fs.h [edit]
[-] nfs2.h [edit]
[-] magic.h [edit]
[-] target_core_user.h [edit]
[-] atm_zatm.h [edit]
[-] pci.h [edit]
[-] nfsacl.h [edit]
[-] if_packet.h [edit]
[-] arcfb.h [edit]
[-] nfs_mount.h [edit]
[-] fib_rules.h [edit]
[-] atmsap.h [edit]
[+] dvb
[-] cciss_defs.h [edit]
[+] netfilter_ipv6
[-] atmdev.h [edit]
[-] kexec.h [edit]
[-] ipc.h [edit]
[-] sock_diag.h [edit]
[+] wimax
[-] serial.h [edit]
[-] if_link.h [edit]
[-] route.h [edit]
[-] if_bonding.h [edit]
[-] auto_fs.h [edit]
[-] pg.h [edit]
[-] l2tp.h [edit]
[-] perf_event.h [edit]
[-] tcp_metrics.h [edit]
[-] v4l2-controls.h [edit]
[-] personality.h [edit]
[-] dcbnl.h [edit]
[-] netfilter_arp.h [edit]
[-] toshiba.h [edit]
[-] memfd.h [edit]
[-] resource.h [edit]
[-] tipc.h [edit]
[-] virtio_vsock.h [edit]
[-] atm_tcp.h [edit]
[-] cn_proc.h [edit]
[-] utime.h [edit]
[-] nbd.h [edit]
[-] netfilter_ipv6.h [edit]
[-] meye.h [edit]
[-] gfs2_ondisk.h [edit]
[-] som.h [edit]
[-] ncp_mount.h [edit]
[-] coda.h [edit]
[-] hw_breakpoint.h [edit]
[-] shm.h [edit]
[-] wanrouter.h [edit]
[-] kernel-page-flags.h [edit]
[-] auto_fs4.h [edit]
[-] ppp_defs.h [edit]
[-] tty.h [edit]
[-] sysctl.h [edit]
[-] joystick.h [edit]
[-] ip.h [edit]
[-] jffs2.h [edit]
[-] nfs3.h [edit]
[-] if_infiniband.h [edit]
[-] agpgart.h [edit]
[+] raid
[-] blkpg.h [edit]
[-] virtio_ids.h [edit]
[-] udp.h [edit]
[-] swab.h [edit]
[-] romfs_fs.h [edit]
[-] fb.h [edit]
[-] kvm_para.h [edit]
[-] btrfs.h [edit]
[-] efs_fs_sb.h [edit]
[-] xfrm.h [edit]
[-] iso_fs.h [edit]
[-] serial_reg.h [edit]
[-] virtio_gpu.h [edit]
[-] sound.h [edit]
[-] errno.h [edit]
[-] kernelcapi.h [edit]
[-] net_tstamp.h [edit]
[-] isdnif.h [edit]
[-] hiddev.h [edit]
[-] ncp_fs.h [edit]
[-] hdlc.h [edit]
[-] fcntl.h [edit]
[-] if.h [edit]
[-] minix_fs.h [edit]
[-] hdreg.h [edit]
[-] virtio_9p.h [edit]
[-] coff.h [edit]
[-] elf-em.h [edit]
[-] mqueue.h [edit]
[+] tc_ematch
[-] gameport.h [edit]
[-] if_ether.h [edit]
[-] if_addrlabel.h [edit]
[-] ife.h [edit]
[-] isdn_divertif.h [edit]
[-] rds.h [edit]
[-] fdreg.h [edit]
[-] pmu.h [edit]
[-] cuda.h [edit]
[-] stat.h [edit]
[-] virtio_net.h [edit]
[-] posix_types.h [edit]
[-] cyclades.h [edit]
[-] baycom.h [edit]
[-] ipv6.h [edit]
[-] net_dropmon.h [edit]
[-] ipmi_msgdefs.h [edit]
[+] netfilter_arp
[-] v4l2-subdev.h [edit]
[-] vsockmon.h [edit]
[-] neighbour.h [edit]
[-] sctp.h [edit]
[-] atmppp.h [edit]
[-] usbdevice_fs.h [edit]
[-] dm-ioctl.h [edit]
[-] netconf.h [edit]
[-] v4l2-dv-timings.h [edit]
[-] chio.h [edit]
[-] msg.h [edit]
[+] netfilter_ipv4
[-] netlink.h [edit]
[-] genetlink.h [edit]
[-] cgroupstats.h [edit]
[-] i8k.h [edit]
[-] cciss_ioctl.h [edit]
[-] major.h [edit]
[-] nfs_fs.h [edit]
[-] rfkill.h [edit]
[-] atm.h [edit]
[-] fuse.h [edit]
[-] fsl_hypervisor.h [edit]
[-] atalk.h [edit]
[-] ivtv.h [edit]
[-] nfs4_mount.h [edit]
[-] pps.h [edit]
[-] nubus.h [edit]
[-] ethtool.h [edit]
[-] hpet.h [edit]
[-] atmmpc.h [edit]
[-] fou.h [edit]
[-] dccp.h [edit]
[-] if_pppox.h [edit]
[-] media.h [edit]
[-] dm-log-userspace.h [edit]
[-] ndctl.h [edit]
[-] wmi.h [edit]
[-] timex.h [edit]
[-] mii.h [edit]
[-] kd.h [edit]
[-] if_pppol2tp.h [edit]
[-] uinput.h [edit]
[-] time.h [edit]
[-] fadvise.h [edit]
[-] phonet.h [edit]
[-] dlm_device.h [edit]
[-] bpf_perf_event.h [edit]
[-] quota.h [edit]
[-] ppdev.h [edit]
[-] ivtvfb.h [edit]
[-] if_plip.h [edit]
[-] net_namespace.h [edit]
[-] ipmi.h [edit]
[-] vhost.h [edit]
[-] v4l2-common.h [edit]
[-] ultrasound.h [edit]
[-] lp.h [edit]
[-] wireless.h [edit]
[-] keyctl.h [edit]
[-] atm_idt77105.h [edit]
[-] bt-bmc.h [edit]
[-] netrom.h [edit]
[-] rtc.h [edit]
[-] types.h [edit]
[-] qnxtypes.h [edit]
[-] affs_hardblocks.h [edit]
[-] if_ppp.h [edit]
[-] prctl.h [edit]
[-] firewire-cdev.h [edit]
[-] sdla.h [edit]
[-] atmbr2684.h [edit]
[-] falloc.h [edit]
[-] connector.h [edit]
[+] mmc
[-] rtnetlink.h [edit]
[-] tty_flags.h [edit]
[-] bpf.h [edit]
[-] watchdog.h [edit]
[-] bsg.h [edit]
[-] kernel.h [edit]
[-] reiserfs_fs.h [edit]
[+] can
[-] selinux_netlink.h [edit]
[-] hdlcdrv.h [edit]
[-] filter.h [edit]
[-] hidraw.h [edit]
[-] icmp.h [edit]
[-] uio.h [edit]
[-] if_ltalk.h [edit]
[-] ppp-ioctl.h [edit]
[-] vtpm_proxy.h [edit]
[-] elfcore.h [edit]
[-] limits.h [edit]
[-] if_tunnel.h [edit]
[-] if_fddi.h [edit]
[-] uvcvideo.h [edit]
[-] ioctl.h [edit]
[-] capi.h [edit]
[-] nvme_ioctl.h [edit]
[-] dlm.h [edit]
[-] tiocl.h [edit]
[-] inotify.h [edit]
[-] poll.h [edit]
[-] rose.h [edit]
[-] if_hippi.h [edit]
[-] matroxfb.h [edit]
[-] i2o-dev.h [edit]
[-] tipc_config.h [edit]
[-] ipsec.h [edit]
[-] dlm_netlink.h [edit]
[-] serio.h [edit]
[-] cdrom.h [edit]
[-] fanotify.h [edit]
[-] virtio_blk.h [edit]
[-] atmioc.h [edit]
[-] securebits.h [edit]
[-] bpf_common.h [edit]
[-] if_team.h [edit]
[-] omapfb.h [edit]
[-] pktcdvd.h [edit]
[-] phantom.h [edit]
[-] atmapi.h [edit]
[-] hyperv.h [edit]
[-] stddef.h [edit]
[-] vt.h [edit]
[-] cycx_cfm.h [edit]
[-] parport.h [edit]
[-] ptrace.h [edit]
[-] nfs.h [edit]
[-] if_bridge.h [edit]
[+] netfilter_bridge
[-] unix_diag.h [edit]
[-] times.h [edit]
[-] n_r3964.h [edit]
[-] nl80211.h [edit]
[-] kvm.h [edit]
[-] virtio_ring.h [edit]
[-] bpqether.h [edit]
[-] ip6_tunnel.h [edit]
[-] sem.h [edit]
[-] llc.h [edit]
[-] omap3isp.h [edit]
[-] virtio_types.h [edit]
[-] xattr.h [edit]
[-] netfilter.h [edit]
[-] edd.h [edit]
[-] inet_diag.h [edit]
[-] vfio.h [edit]
[-] un.h [edit]
[-] termios.h [edit]
[+] usb
[-] firewire-constants.h [edit]
[-] nfs4.h [edit]
[-] atmclip.h [edit]
[-] devlink.h [edit]
[-] ip_vs.h [edit]
[-] nfc.h [edit]
[-] flat.h [edit]
[-] elf.h [edit]
[-] if_x25.h [edit]
[-] mdio.h [edit]
[-] isdn_ppp.h [edit]
[+] isdn
[-] cm4000_cs.h [edit]
[-] nvram.h [edit]
[-] param.h [edit]
[-] dlm_plock.h [edit]
[-] virtio_balloon.h [edit]
[-] telephony.h [edit]
[-] dlmconstants.h [edit]
[-] tcp.h [edit]
[-] futex.h [edit]
[-] virtio_scsi.h [edit]
[-] net.h [edit]
[-] sonypi.h [edit]
[-] wait.h [edit]
[-] apm_bios.h [edit]
[-] if_macsec.h [edit]
[+] hsi
[-] gigaset_dev.h [edit]
[-] capability.h [edit]
[-] errqueue.h [edit]
[+] netfilter
[-] a.out.h [edit]
[-] utsname.h [edit]
[-] gen_stats.h [edit]
[-] kdev_t.h [edit]
[-] if_vlan.h [edit]
[-] lwtunnel.h [edit]
[-] uhid.h [edit]
[-] i2c-dev.h [edit]
[-] wimax.h [edit]
[-] openvswitch.h [edit]
[-] virtio_input.h [edit]
[-] sonet.h [edit]
[+] hdlc
[-] ppp-comp.h [edit]
[-] veth.h [edit]
[-] atmsvc.h [edit]
[-] netlink_diag.h [edit]
[-] hid.h [edit]
[-] const.h [edit]
[-] psample.h [edit]
[-] vm_sockets.h [edit]
[-] i2c.h [edit]
[-] synclink.h [edit]
[-] if_arp.h [edit]
[-] pfkeyv2.h [edit]
[-] virtio_config.h [edit]
[-] if_fc.h [edit]
[-] eventpoll.h [edit]
[-] binfmts.h [edit]
[-] soundcard.h [edit]
[-] in6.h [edit]
[-] b1lli.h [edit]
[-] suspend_ioctls.h [edit]
[-] loop.h [edit]
[-] seccomp.h [edit]
[-] blktrace_api.h [edit]
[-] adfs_fs.h [edit]
[-] netdevice.h [edit]
[-] virtio_console.h [edit]
[-] dqblk_xfs.h [edit]
[-] netfilter_decnet.h [edit]
[-] mmtimer.h [edit]
[-] can.h [edit]
[-] adb.h [edit]
[-] acct.h [edit]
[-] ax25.h [edit]
[-] coda_psdev.h [edit]
[-] elf-fdpic.h [edit]
[-] virtio_rng.h [edit]
[-] signal.h [edit]
[-] libc-compat.h [edit]
[-] taskstats.h [edit]
[-] ncp_no.h [edit]
[-] ipx.h [edit]
[-] userfaultfd.h [edit]
[-] mempolicy.h [edit]
[-] icmpv6.h [edit]
[-] atmarp.h [edit]
[-] if_frad.h [edit]
[-] signalfd.h [edit]
[-] irda.h [edit]
[-] fiemap.h [edit]
[-] virtio_pci.h [edit]
[-] if_cablemodem.h [edit]
[-] in_route.h [edit]
[-] mpls.h [edit]
[-] input.h [edit]
[-] nfs_idmap.h [edit]
[-] cramfs_fs.h [edit]
[-] ptp_clock.h [edit]
[-] audit.h [edit]
[-] if_tun.h [edit]
[-] igmp.h [edit]
[-] if_alg.h [edit]
[-] random.h [edit]
[-] netfilter_ipv4.h [edit]
[-] atm_nicstar.h [edit]
[-] packet_diag.h [edit]
[-] x25.h [edit]
[+] tc_act
[-] in.h [edit]
[-] irqnr.h [edit]
[-] ncp.h [edit]
[-] reiserfs_xattr.h [edit]
[+] iio
[-] fs.h [edit]
[-] map_to_7segment.h [edit]
[+] sunrpc
[-] if_addr.h [edit]
[-] mtio.h [edit]
[+] nfsd
[-] hysdn_if.h [edit]
[-] pci_regs.h [edit]
[-] mroute6.h [edit]
[-] isdn.h [edit]
[-] udf_fs_i.h [edit]