ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / lib / python2.7 / site-packages / chardet

######################## BEGIN LICENSE BLOCK ########################
# The Original Code is Mozilla Communicator client code.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1998
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#   Mark Pilgrim - port to Python
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
# 02110-1301  USA
######################### END LICENSE BLOCK #########################

from .euctwfreq import (EUCTWCharToFreqOrder, EUCTW_TABLE_SIZE,
                        EUCTW_TYPICAL_DISTRIBUTION_RATIO)
from .euckrfreq import (EUCKRCharToFreqOrder, EUCKR_TABLE_SIZE,
                        EUCKR_TYPICAL_DISTRIBUTION_RATIO)
from .gb2312freq import (GB2312CharToFreqOrder, GB2312_TABLE_SIZE,
                         GB2312_TYPICAL_DISTRIBUTION_RATIO)
from .big5freq import (Big5CharToFreqOrder, BIG5_TABLE_SIZE,
                       BIG5_TYPICAL_DISTRIBUTION_RATIO)
from .jisfreq import (JISCharToFreqOrder, JIS_TABLE_SIZE,
                      JIS_TYPICAL_DISTRIBUTION_RATIO)
from .compat import wrap_ord

ENOUGH_DATA_THRESHOLD = 1024
SURE_YES = 0.99
SURE_NO = 0.01
MINIMUM_DATA_THRESHOLD = 3

class CharDistributionAnalysis:
    def __init__(self):
        # Mapping table to get frequency order from char order (get from
        # GetOrder())
        self._mCharToFreqOrder = None
        self._mTableSize = None  # Size of above table
        # This is a constant value which varies from language to language,
        # used in calculating confidence.  See
        # http://www.mozilla.org/projects/intl/UniversalCharsetDetection.html
        # for further detail.
        self._mTypicalDistributionRatio = None
        self.reset()

def reset(self):
        """reset analyser, clear any state"""
        # If this flag is set to True, detection is done and conclusion has
        # been made
        self._mDone = False
        self._mTotalChars = 0  # Total characters encountered
        # The number of characters whose frequency order is less than 512
        self._mFreqChars = 0

def feed(self, aBuf, aCharLen):
        """feed a character with known length"""
        if aCharLen == 2:
            # we only care about 2-bytes character in our distribution analysis
            order = self.get_order(aBuf)
        else:
            order = -1
        if order >= 0:
            self._mTotalChars += 1
            # order is valid
            if order < self._mTableSize:
                if 512 > self._mCharToFreqOrder[order]:
                    self._mFreqChars += 1

def get_confidence(self):
        """return confidence based on existing data"""
        # if we didn't receive any character in our consideration range,
        # return negative answer
        if self._mTotalChars <= 0 or self._mFreqChars <= MINIMUM_DATA_THRESHOLD:
            return SURE_NO

if self._mTotalChars != self._mFreqChars:
            r = (self._mFreqChars / ((self._mTotalChars - self._mFreqChars)
                 * self._mTypicalDistributionRatio))
            if r < SURE_YES:
                return r

# normalize confidence (we don't want to be 100% sure)
        return SURE_YES

def got_enough_data(self):
        # It is not necessary to receive all data to draw conclusion.
        # For charset detection, certain amount of data is enough
        return self._mTotalChars > ENOUGH_DATA_THRESHOLD

def get_order(self, aBuf):
        # We do not handle characters based on the original encoding string,
        # but convert this encoding string to a number, here called order.
        # This allows multiple encodings of a language to share one frequency
        # table.
        return -1

class EUCTWDistributionAnalysis(CharDistributionAnalysis):
    def __init__(self):
        CharDistributionAnalysis.__init__(self)
        self._mCharToFreqOrder = EUCTWCharToFreqOrder
        self._mTableSize = EUCTW_TABLE_SIZE
        self._mTypicalDistributionRatio = EUCTW_TYPICAL_DISTRIBUTION_RATIO

def get_order(self, aBuf):
        # for euc-TW encoding, we are interested
        #   first  byte range: 0xc4 -- 0xfe
        #   second byte range: 0xa1 -- 0xfe
        # no validation needed here. State machine has done that
        first_char = wrap_ord(aBuf[0])
        if first_char >= 0xC4:
            return 94 * (first_char - 0xC4) + wrap_ord(aBuf[1]) - 0xA1
        else:
            return -1

class EUCKRDistributionAnalysis(CharDistributionAnalysis):
    def __init__(self):
        CharDistributionAnalysis.__init__(self)
        self._mCharToFreqOrder = EUCKRCharToFreqOrder
        self._mTableSize = EUCKR_TABLE_SIZE
        self._mTypicalDistributionRatio = EUCKR_TYPICAL_DISTRIBUTION_RATIO

def get_order(self, aBuf):
        # for euc-KR encoding, we are interested
        #   first  byte range: 0xb0 -- 0xfe
        #   second byte range: 0xa1 -- 0xfe
        # no validation needed here. State machine has done that
        first_char = wrap_ord(aBuf[0])
        if first_char >= 0xB0:
            return 94 * (first_char - 0xB0) + wrap_ord(aBuf[1]) - 0xA1
        else:
            return -1

class GB2312DistributionAnalysis(CharDistributionAnalysis):
    def __init__(self):
        CharDistributionAnalysis.__init__(self)
        self._mCharToFreqOrder = GB2312CharToFreqOrder
        self._mTableSize = GB2312_TABLE_SIZE
        self._mTypicalDistributionRatio = GB2312_TYPICAL_DISTRIBUTION_RATIO

def get_order(self, aBuf):
        # for GB2312 encoding, we are interested
        #  first  byte range: 0xb0 -- 0xfe
        #  second byte range: 0xa1 -- 0xfe
        # no validation needed here. State machine has done that
        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
        if (first_char >= 0xB0) and (second_char >= 0xA1):
            return 94 * (first_char - 0xB0) + second_char - 0xA1
        else:
            return -1

class Big5DistributionAnalysis(CharDistributionAnalysis):
    def __init__(self):
        CharDistributionAnalysis.__init__(self)
        self._mCharToFreqOrder = Big5CharToFreqOrder
        self._mTableSize = BIG5_TABLE_SIZE
        self._mTypicalDistributionRatio = BIG5_TYPICAL_DISTRIBUTION_RATIO

def get_order(self, aBuf):
        # for big5 encoding, we are interested
        #   first  byte range: 0xa4 -- 0xfe
        #   second byte range: 0x40 -- 0x7e , 0xa1 -- 0xfe
        # no validation needed here. State machine has done that
        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
        if first_char >= 0xA4:
            if second_char >= 0xA1:
                return 157 * (first_char - 0xA4) + second_char - 0xA1 + 63
            else:
                return 157 * (first_char - 0xA4) + second_char - 0x40
        else:
            return -1

class SJISDistributionAnalysis(CharDistributionAnalysis):
    def __init__(self):
        CharDistributionAnalysis.__init__(self)
        self._mCharToFreqOrder = JISCharToFreqOrder
        self._mTableSize = JIS_TABLE_SIZE
        self._mTypicalDistributionRatio = JIS_TYPICAL_DISTRIBUTION_RATIO

def get_order(self, aBuf):
        # for sjis encoding, we are interested
        #   first  byte range: 0x81 -- 0x9f , 0xe0 -- 0xfe
        #   second byte range: 0x40 -- 0x7e,  0x81 -- oxfe
        # no validation needed here. State machine has done that
        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
        if (first_char >= 0x81) and (first_char <= 0x9F):
            order = 188 * (first_char - 0x81)
        elif (first_char >= 0xE0) and (first_char <= 0xEF):
            order = 188 * (first_char - 0xE0 + 31)
        else:
            return -1
        order = order + second_char - 0x40
        if second_char > 0x7F:
            order = -1
        return order

class EUCJPDistributionAnalysis(CharDistributionAnalysis):
    def __init__(self):
        CharDistributionAnalysis.__init__(self)
        self._mCharToFreqOrder = JISCharToFreqOrder
        self._mTableSize = JIS_TABLE_SIZE
        self._mTypicalDistributionRatio = JIS_TYPICAL_DISTRIBUTION_RATIO

def get_order(self, aBuf):
        # for euc-JP encoding, we are interested
        #   first  byte range: 0xa0 -- 0xfe
        #   second byte range: 0xa1 -- 0xfe
        # no validation needed here. State machine has done that
        char = wrap_ord(aBuf[0])
        if char >= 0xA0:
            return 94 * (char - 0xA1) + wrap_ord(aBuf[1]) - 0xa1
        else:
            return -1

[-] sbcharsetprober.pyc [edit]
[-] langhungarianmodel.pyc [edit]
[-] escprober.pyo [edit]
[-] mbcssm.py [edit]
[-] langcyrillicmodel.pyc [edit]
[-] euckrprober.py [edit]
[-] charsetprober.py [edit]
[-] sbcsgroupprober.py [edit]
[-] euckrfreq.pyc [edit]
[-] utf8prober.py [edit]
[-] eucjpprober.py [edit]
[-] langhungarianmodel.pyo [edit]
[-] __init__.pyo [edit]
[-] mbcsgroupprober.pyc [edit]
[-] chardistribution.pyc [edit]
[-] codingstatemachine.py [edit]
[-] eucjpprober.pyc [edit]
[-] gb2312prober.py [edit]
[-] sjisprober.py [edit]
[-] escprober.py [edit]
[-] universaldetector.py [edit]
[+] ..
[-] eucjpprober.pyo [edit]
[-] gb2312freq.py [edit]
[-] mbcharsetprober.py [edit]
[-] langhebrewmodel.pyo [edit]
[-] big5freq.pyo [edit]
[-] big5freq.py [edit]
[-] langgreekmodel.pyc [edit]
[-] langgreekmodel.pyo [edit]
[-] big5prober.pyo [edit]
[-] sjisprober.pyc [edit]
[-] jisfreq.pyc [edit]
[-] euctwprober.pyc [edit]
[-] euctwprober.py [edit]
[-] __init__.pyc [edit]
[-] sbcsgroupprober.pyo [edit]
[-] latin1prober.pyo [edit]
[-] mbcssm.pyc [edit]
[-] chardetect.pyo [edit]
[-] constants.pyo [edit]
[-] sbcsgroupprober.pyc [edit]
[-] langthaimodel.py [edit]
[-] euckrfreq.pyo [edit]
[-] jisfreq.pyo [edit]
[-] mbcsgroupprober.pyo [edit]
[-] charsetprober.pyc [edit]
[-] chardistribution.pyo [edit]
[-] sbcharsetprober.py [edit]
[-] big5freq.pyc [edit]
[-] cp949prober.pyc [edit]
[-] mbcharsetprober.pyo [edit]
[-] constants.py [edit]
[-] jpcntx.pyo [edit]
[-] hebrewprober.pyc [edit]
[-] euctwfreq.pyo [edit]
[-] langgreekmodel.py [edit]
[-] euctwfreq.py [edit]
[-] escsm.py [edit]
[-] jpcntx.pyc [edit]
[-] euckrfreq.py [edit]
[-] big5prober.pyc [edit]
[-] langbulgarianmodel.py [edit]
[-] compat.pyc [edit]
[-] hebrewprober.pyo [edit]
[-] langthaimodel.pyc [edit]
[-] euckrprober.pyo [edit]
[-] gb2312prober.pyc [edit]
[-] compat.py [edit]
[-] big5prober.py [edit]
[-] cp949prober.py [edit]
[-] jisfreq.py [edit]
[-] compat.pyo [edit]
[-] mbcsgroupprober.py [edit]
[-] langbulgarianmodel.pyo [edit]
[-] chardetect.py [edit]
[-] gb2312prober.pyo [edit]
[-] escsm.pyo [edit]
[-] latin1prober.pyc [edit]
[-] charsetgroupprober.py [edit]
[-] __init__.py [edit]
[-] hebrewprober.py [edit]
[-] universaldetector.pyc [edit]
[-] utf8prober.pyo [edit]
[-] charsetgroupprober.pyc [edit]
[-] charsetprober.pyo [edit]
[-] latin1prober.py [edit]
[-] langbulgarianmodel.pyc [edit]
[-] gb2312freq.pyo [edit]
[-] escsm.pyc [edit]
[-] euctwprober.pyo [edit]
[-] universaldetector.pyo [edit]
[-] sjisprober.pyo [edit]
[-] codingstatemachine.pyo [edit]
[-] charsetgroupprober.pyo [edit]
[-] jpcntx.py [edit]
[-] escprober.pyc [edit]
[-] langcyrillicmodel.py [edit]
[-] chardetect.pyc [edit]
[-] constants.pyc [edit]
[-] mbcharsetprober.pyc [edit]
[-] gb2312freq.pyc [edit]
[-] langhebrewmodel.py [edit]
[-] euctwfreq.pyc [edit]
[-] langcyrillicmodel.pyo [edit]
[-] chardistribution.py [edit]
[-] sbcharsetprober.pyo [edit]
[-] langthaimodel.pyo [edit]
[-] langhebrewmodel.pyc [edit]
[-] mbcssm.pyo [edit]
[-] langhungarianmodel.py [edit]
[-] utf8prober.pyc [edit]
[-] codingstatemachine.pyc [edit]
[-] cp949prober.pyo [edit]
[-] euckrprober.pyc [edit]