ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: opt / bitninja-python-dojo / embedded / lib / python3.9 / test

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command #"testparm" # to check that you have not made any basic syntactic #errors. 
#
#======================= Global Settings =====================================
[global]

# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
   
  workgroup = MDKGROUP

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname

;  netbios name = <name_of_this_server>

# server string is the equivalent of the NT Description field
   
  server string = Samba Server %v

# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s

# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in linux-mandrake 7.2 by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   
   printcap name = lpstat
   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
   
  printing = cups

# Samba 2.2 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to 
# enable it below.
# This parameter works like domain admin group:
# printer admin = @<group> <user>
;   printer admin = @adm
# This should work well for winbind:
;   printer admin = @"Domain Admins"

# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects

log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Set the log (verbosity) level (0 <= log level <= 10)
; log level = 3

# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution #does
# not work for all the hosts in your network.
;   hosts allow = 192.168.1. 192.168.2. 127.

hosts allow = 127.  //note this is only my private IP address

# Uncomment this if you want a guest account, you must add this to
# /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# Security mode. Most people will want user level security. See
# security_level.txt for details.

security = user

# Use password server option only with security = server or security = # domain
# When using security = domain, you should use password server = *
;   password server = 
;   password server = *

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.

password level = 8

;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT #domain
# The smbpasswd file is only required by a server doing authentication, #thus members of a domain do not need one.

encrypt passwords = yes
  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
;  pam password change = yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* 
# %n\n
;*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customize your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to
# unix uid's 
# and gid's. winbind uid and winbind gid are the only required
# parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs #to uid's
;  winbind uid = 10000-20000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs
# to gid's
;  winbind gid = 10000-20000
#
# winbind separator is the character a user must use between their
# domain name and username, defaults to "\"
;  winbind separator = +
#
# winbind use default domain allows you to have winbind return
# usernames in the form user instead of DOMAIN+user for the domain
# listed in the workgroup parameter.
;  winbind use default domain = yes
#
# template homedir determines the home directory for winbind users,
# with %D expanding to their domain name and %U expanding to their
# username:
;  template homedir = /home/%D/%U

# When using winbind, you may want to have samba create home
# directories on the fly for authenticated users. Ensure that 
# /etc/pam.d/samba is using 'service=system-auth-winbind' in pam_stack 
# modules, and then enable obedience of pam restrictions below:
;  obey pam restrictions = yes

#
# template shell determines the shell users authenticated by winbind #get
;  template shell = /bin/bash

# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details

socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on
# startup and gives it a slightly higher chance of winning the election
;   preferred master = yes

# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations or Primary Domain Controller for WinNT and
# Win2k

;  domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roaming profiles for WinNT and Win2k
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Where to store roaming profiles for Win9x. Be careful with this as it
# also impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile

# The add user script is used by a domain member to add local user
# accounts that have been authenticated by the domain controller, or by 
# the domain controller to add local machine accounts when adding 
# machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a 
# group.
# Script for domain controller for adding machines:
; add user script = /usr/sbin/useradd -d /dev/null -g machines –c
# 'Machine Account' -s /bin/false -M %u
# Script for domain controller with LDAP backend for adding machines 
#(please
# configure in /etc/samba/smbldap_conf.pm first):
; add user script = /usr/share/samba/scripts/smbldap-useradd.pl -w –d
# /dev/null -g machines -c 'Machine Account' -s /bin/false %u
# Script for domain member for adding local accounts for authenticated
# users:
; add user script = /usr/sbin/useradd -s /bin/false %u

# Domain groups:
# domain admin group is a list of unix users or groups who are made
# members
# of the Domain Admin group
; domain admin group = root @wheel
#
# domain guest groups is a list of unix users or groups who are made
# members
# of the Domain Guests group
; domain guest group = nobody @guest

# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by 
# running 'smbpasswd -w mypassword'
; ldap admin dn = cn=root,dc=mydomain,dc=com
; ldap ssl = start_tls
# start_tls should run on 389, but samba defaults incorrectly to 636
; ldap port = 389
; ldap suffix = dc=mydomain,dc=com
; ldap server = ldap.mydomain.com

# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be
# specified the default order is "host lmhosts wins bcast". "host" 
# means use the unix system gethostbyname() function call that will use 
# either /etc/hosts OR DNS or NIS depending on the settings of 
# /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system 
# configuration dependent. This parameter is most often of use to 
# prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that
# are NOT on the local network segment  - OR - are not deliberately to 
# be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
# Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but 
# NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS 
# names  via DNS nslookups. The built-in default for versions 1.9.17 is 
# yes, this has been changed in version 1.9.18 to no.

dns proxy = no

# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean 
# Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
;   client code page = 850
;   character set = ISO8859-1

#============================ Share Definitions ==============================

[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in samba-doc for details
;   vfs object = /usr/lib/samba/vfs/recycle.so
;   vfs options= /etc/samba/recycle.conf

# Un-comment the following and create the netlogon directory for Domain
# Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /var/lib/samba/netlogon
;   guest ok = yes
;   writable = no

#Uncomment the following 2 lines if you would like your login scripts
# to be created dynamically by ntlogon (check that you have it in the
# correct location (the default of the ntlogon rpm available in
# contribs)

;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon
;root postexec = rm -f /var/lib/samba/netlogon/%U.bat

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /var/lib/samba/profiles
;    browseable = no
;    guest ok = yes

# NOTE: If you have a CUPS print system there is no need to 
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you
# have to swap the 'print command' line below with the commented one.

[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# to allow user 'guest account' to print.
   guest ok = yes
   writable = no
   printable = yes
   create mode = 0700

# =====================================
# print command: see above for details.
# =====================================

print command = lpr-cups -P %p -o raw %s -r 
# using client side printer drivers.
;  print command = lpr-cups -P %p %s 
# using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
;   lpq command = lpq -P %p
;   lprm command = cancel %p-%j

# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write 
# access to the directory and share definition to be able to upload the 
# drivers.
# For more information on this, please see the Printing Support Section
# of  /usr/share/doc/samba-/docs/Samba-HOWTO-Collection.pdf

[print$]
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   write list = @adm root

# A useful application of samba is to make a PDF-generation service
# To streamline this, install windows postscript drivers (preferably 
# colour)on the samba server, so that clients can automatically install
# them.

[pdf-generator]
   path = /var/tmp
   guest ok = No
   printable = Yes
   comment = PDF Generator (only valid users)
   #print command = /usr/share/samba/scripts/print-pdf file path win_path recipient IP &
   print command = /usr/share/samba/scripts/print-pdf %s ~%u \\\\\\\\%L\\\\%u %m %I &

# This one is useful for people to share files
[tmp]
   comment = Temporary file space
   path = /tmp
   read only = no
   public = yes
   echo command = cat %s; rm %s

# A publicly accessible directory, but read only, except for people in
# the "staff" group

;[public]
;   comment = Public Stuff
;   path = /home/samba/public
;   public = yes
;   writable = no
;   write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
;   vfs object = /usr/lib/samba/vfs/audit.so

# Other examples. 
#
# A private printer, usable only by Fred. Spool data will be placed in
# Fred's
# home directory. Note that fred must have write access to the spool 
# directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

-----------------------------------------------------------
# A private directory, usable only by Fred. Note that Fred requires 
# write access to the directory.

;[fredsdir]

[Agustin]
;   comment = Fred's Service
    comment = Agustin Private Files
;   path = /usr/somewhere/private
    path = /home/agustin/Documents
;   valid users = fred
    valid users = agustin
;   public = no
;   writable = yes
    writable = yes
;   printable = no

-----------------------------------------------------------

# a service which has a different directory for each machine that 
# connects this allows you to tailor configurations to incoming 
# machines. You could also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

-----------------------------------------------------------
# A publicly accessible directory, read/write to all users. Note that
# all files created in the directory by users will be owned by the 
# default user, so any user with access can delete any other user's 
# files. Obviously this directory must be writable by the default user. 
# Another user could of course be specified, in which case all files 
# would be owned by that user instead.

;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

-----------------------------------------------------------

# The following two entries demonstrate how to share a directory so 
# that two users can place files there that will be owned by the 
# specific users. In this setup, the directory should be writable by 
# both users and should have the sticky bit set on it to prevent abuse. 
# Obviously this could be extended to as many users as required.

;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

[+] ..
[-] test_largefile.py [edit]
[-] test_set.py [edit]
[-] test_sunau.py [edit]
[-] test_webbrowser.py [edit]
[-] test_idle.py [edit]
[-] keycert.passwd.pem [edit]
[-] bisect_cmd.py [edit]
[-] talos-2019-0758.pem [edit]
[-] audiotest.au [edit]
[-] test_selectors.py [edit]
[-] test_pydoc.py [edit]
[-] test_uu.py [edit]
[-] ssltests.py [edit]
[-] test_heapq.py [edit]
[-] test_parser.py [edit]
[-] test_bufio.py [edit]
[-] test_ucn.py [edit]
[-] sample_doctest_no_doctests.py [edit]
[-] Sine-1000Hz-300ms.aif [edit]
[-] test_pkg.py [edit]
[+] support
[-] profilee.py [edit]
[-] test_codecencodings_hk.py [edit]
[-] pydocfodder.py [edit]
[-] test_graphlib.py [edit]
[-] test_raise.py [edit]
[-] test_genericalias.py [edit]
[-] curses_tests.py [edit]
[-] _typed_dict_helper.py [edit]
[-] test_doctest2.txt [edit]
[-] test_zipfile.py [edit]
[-] test_imghdr.py [edit]
[-] test_type_comments.py [edit]
[-] bad_getattr.py [edit]
[-] test_asyncore.py [edit]
[-] test_script_helper.py [edit]
[+] sndhdrdata
[-] test_ossaudiodev.py [edit]
[-] formatfloat_testcases.txt [edit]
[-] test_grammar.py [edit]
[-] test_unicodedata.py [edit]
[-] test_re.py [edit]
[-] test_pkgutil.py [edit]
[-] test_nis.py [edit]
[-] test__xxsubinterpreters.py [edit]
[-] nullbytecert.pem [edit]
[-] pydoc_mod.py [edit]
[-] test_winconsoleio.py [edit]
[-] test_abstract_numbers.py [edit]
[-] test_glob.py [edit]
[-] test_runpy.py [edit]
[+] data
[-] test__opcode.py [edit]
[+] cjkencodings
[-] test_descr.py [edit]
[-] test_codecmaps_hk.py [edit]
[-] test_future3.py [edit]
[-] test_regrtest.py [edit]
[-] test_c_locale_coercion.py [edit]
[-] test_doctest4.txt [edit]
[-] test_dis.py [edit]
[-] test_xml_etree.py [edit]
[-] ann_module5.py [edit]
[-] test_sundry.py [edit]
[-] test_pstats.py [edit]
[-] test_socketserver.py [edit]
[-] test_codeop.py [edit]
[-] test_genericpath.py [edit]
[-] test_complex.py [edit]
[-] test_grp.py [edit]
[-] test_extcall.py [edit]
[-] test_sys_setprofile.py [edit]
[-] test_threading.py [edit]
[-] test_subclassinit.py [edit]
[-] gdb_sample.py [edit]
[-] test_wsgiref.py [edit]
[-] test_fstring.py [edit]
[-] allsans.pem [edit]
[-] inspect_fodder2.py [edit]
[-] dataclass_module_2_str.py [edit]
[-] test_unary.py [edit]
[-] test_doctest.py [edit]
[-] badsyntax_future8.py [edit]
[-] test_decorators.py [edit]
[-] _test_multiprocessing.py [edit]
[-] ieee754.txt [edit]
[-] badsyntax_future4.py [edit]
[-] test_property.py [edit]
[-] test_symbol.py [edit]
[-] test_rlcompleter.py [edit]
[-] test_sort.py [edit]
[-] test_codecencodings_cn.py [edit]
[-] test_traceback.py [edit]
[-] test_xmlrpc.py [edit]
[+] test_peg_generator
[-] test_posixpath.py [edit]
[-] test_future5.py [edit]
[-] test_textwrap.py [edit]
[-] mapping_tests.py [edit]
[-] test_gzip.py [edit]
[-] floating_points.txt [edit]
[-] test_httpservers.py [edit]
[-] test_array.py [edit]
[-] test_structmembers.py [edit]
[-] test_pwd.py [edit]
[-] test_calendar.py [edit]
[-] test_dynamicclassattribute.py [edit]
[+] test_tools
[-] dataclass_module_2.py [edit]
[-] test_codecencodings_kr.py [edit]
[-] mp_fork_bomb.py [edit]
[-] ssl_key.pem [edit]
[-] test_bz2.py [edit]
[-] test_codeccallbacks.py [edit]
[-] test_deque.py [edit]
[-] test_peepholer.py [edit]
[-] test_multiprocessing_forkserver.py [edit]
[-] test_unittest.py [edit]
[-] test_asynchat.py [edit]
[-] test_struct.py [edit]
[-] test_osx_env.py [edit]
[-] test_slice.py [edit]
[-] test_finalization.py [edit]
[-] test_pipes.py [edit]
[-] test_multiprocessing_main_handling.py [edit]
[-] test_unicode_identifiers.py [edit]
[-] test_userlist.py [edit]
[-] datetimetester.py [edit]
[-] test_fork1.py [edit]
[-] test_shelve.py [edit]
[-] test_fcntl.py [edit]
[-] test_errno.py [edit]
[-] test_tempfile.py [edit]
[-] make_ssl_certs.py [edit]
[-] randv2_64.pck [edit]
[-] string_tests.py [edit]
[-] future_test1.py [edit]
[-] test_pathlib.py [edit]
[-] nullcert.pem [edit]
[-] test_wait4.py [edit]
[-] test_cmd.py [edit]
[-] test_memoryview.py [edit]
[+] audiodata
[-] test_modulefinder.py [edit]
[-] test_optparse.py [edit]
[+] libregrtest
[-] test_bigaddrspace.py [edit]
[-] test_module.py [edit]
[-] test_structseq.py [edit]
[-] test_unicode.py [edit]
[-] test_positional_only_arg.py [edit]
[-] test_wave.py [edit]
[-] test_popen.py [edit]
[-] test_multiprocessing_fork.py [edit]
[-] test_context.py [edit]
[+] test_email
[-] test_typechecks.py [edit]
[-] mp_preload.py [edit]
[-] win_console_handler.py [edit]
[-] test_capi.py [edit]
[-] multibytecodec_support.py [edit]
[-] test_lib2to3.py [edit]
[-] test_copyreg.py [edit]
[-] test_operator.py [edit]
[-] test_urllib.py [edit]
[-] test_resource.py [edit]
[-] keycert.pem [edit]
[-] test_ioctl.py [edit]
[-] test_getopt.py [edit]
[+] eintrdata
[-] badsyntax_future3.py [edit]
[-] test_buffer.py [edit]
[-] test_math.py [edit]
[-] test_thread.py [edit]
[-] keycert3.pem [edit]
[-] test_configparser.py [edit]
[-] test_float.py [edit]
[-] test_pprint.py [edit]
[-] test_long.py [edit]
[-] test_netrc.py [edit]
[-] test_concurrent_futures.py [edit]
[-] mime.types [edit]
[-] memory_watchdog.py [edit]
[-] test_compare.py [edit]
[-] test_future.py [edit]
[-] ann_module.py [edit]
[-] signalinterproctester.py [edit]
[-] badsyntax_future9.py [edit]
[-] test_baseexception.py [edit]
[-] test_timeout.py [edit]
[-] lock_tests.py [edit]
[-] test_urllib2net.py [edit]
[-] math_testcases.txt [edit]
[-] test_listcomps.py [edit]
[-] test_filecmp.py [edit]
[-] test_unpack_ex.py [edit]
[-] test_sys.py [edit]
[-] test_bytes.py [edit]
[-] selfsigned_pythontestdotnet.pem [edit]
[-] keycert2.pem [edit]
[-] test_file_eintr.py [edit]
[-] exception_hierarchy.txt [edit]
[-] test_decimal.py [edit]
[-] test_spwd.py [edit]
[-] test_aifc.py [edit]
[-] reperf.py [edit]
[-] test_userstring.py [edit]
[-] test_ordered_dict.py [edit]
[-] ann_module3.py [edit]
[-] test_threading_local.py [edit]
[-] test_pdb.py [edit]
[-] test_smtpnet.py [edit]
[-] recursion.tar [edit]
[-] test_zipimport_support.py [edit]
[+] test_warnings
[-] test_richcmp.py [edit]
[-] test_mailcap.py [edit]
[-] test_linecache.py [edit]
[-] test_weakref.py [edit]
[-] test_iter.py [edit]
[-] test_copy.py [edit]
[-] test_scope.py [edit]
[-] __main__.py [edit]
[-] test_crypt.py [edit]
[-] test_clinic.py [edit]
[-] tokenize_tests-utf8-coding-cookie-and-utf8-bom-sig.txt [edit]
[-] test_gdb.py [edit]
[-] test_audioop.py [edit]
[-] empty.vbs [edit]
[-] test_with.py [edit]
[-] inspect_fodder.py [edit]
[-] test_iterlen.py [edit]
[-] seq_tests.py [edit]
[-] test_colorsys.py [edit]
[-] test_openpty.py [edit]
[-] test_opcodes.py [edit]
[-] test_sysconfig.py [edit]
[-] test_quopri.py [edit]
[-] test_smtpd.py [edit]
[-] idnsans.pem [edit]
[-] test_site.py [edit]
[-] test_strptime.py [edit]
[-] test_code.py [edit]
[-] mock_socket.py [edit]
[-] test_genexps.py [edit]
[-] badsyntax_future10.py [edit]
[-] tokenize_tests-no-coding-cookie-and-utf8-bom-sig-only.txt [edit]
[-] test_epoll.py [edit]
[-] test_itertools.py [edit]
[-] test_cprofile.py [edit]
[-] test_uuid.py [edit]
[-] test_lltrace.py [edit]
[-] test_zipfile64.py [edit]
[-] test_tcl.py [edit]
[-] test_cgitb.py [edit]
[-] test_datetime.py [edit]
[-] test_doctest3.txt [edit]
[-] test_pulldom.py [edit]
[+] ziptestdata
[-] future_test2.py [edit]
[-] test_winreg.py [edit]
[-] test_atexit.py [edit]
[-] test_ttk_textonly.py [edit]
[-] test_bigmem.py [edit]
[-] ffdh3072.pem [edit]
[-] test_charmapcodec.py [edit]
[-] test_utf8_mode.py [edit]
[-] test_zipimport.py [edit]
[-] test_html.py [edit]
[-] test_robotparser.py [edit]
[-] test_types.py [edit]
[-] test_codecencodings_iso2022.py [edit]
[-] test_bisect.py [edit]
[-] test_class.py [edit]
[-] test_dictviews.py [edit]
[-] test_mailbox.py [edit]
[-] test_httplib.py [edit]
[-] test_bool.py [edit]
[-] test_tarfile.py [edit]
[-] test_io.py [edit]
[-] test_enum.py [edit]
[-] test_fileio.py [edit]
[-] badsyntax_3131.py [edit]
[-] test_asdl_parser.py [edit]
[-] keycertecc.pem [edit]
[-] test_code_module.py [edit]
[-] test_descrtut.py [edit]
[-] autotest.py [edit]
[-] test_poplib.py [edit]
[-] test_compileall.py [edit]
[-] test_frame.py [edit]
[-] list_tests.py [edit]
[+] test_zoneinfo
[-] coding20731.py [edit]
[-] test_imp.py [edit]
[+] test_asyncio
[-] test_pyexpat.py [edit]
[-] test_pickle.py [edit]
[-] randv3.pck [edit]
[-] bad_coding2.py [edit]
[-] test__osx_support.py [edit]
[-] test_setcomps.py [edit]
[-] fork_wait.py [edit]
[-] test_posix.py [edit]
[-] test_enumerate.py [edit]
[-] test_eof.py [edit]
[+] __pycache__
[-] tokenize_tests-utf8-coding-cookie-and-no-utf8-bom-sig.txt [edit]
[-] pythoninfo.py [edit]
[-] pickletester.py [edit]
[-] time_hashlib.py [edit]
[-] test_shlex.py [edit]
[-] test_dict_version.py [edit]
[-] test_statistics.py [edit]
[-] test_ntpath.py [edit]
[-] test_mmap.py [edit]
[-] test_difflib.py [edit]
[-] tokenize_tests-latin1-coding-cookie-and-utf8-bom-sig.txt [edit]
[-] test_curses.py [edit]
[-] test_codecencodings_jp.py [edit]
[-] test_tix.py [edit]
[-] test_timeit.py [edit]
[-] test_memoryio.py [edit]
[-] test_ftplib.py [edit]
[-] test_gettext.py [edit]
[-] clinic.test [edit]
[-] test_distutils.py [edit]
[-] test_support.py [edit]
[-] test_augassign.py [edit]
[-] test_imaplib.py [edit]
[-] test_sndhdr.py [edit]
[-] mailcap.txt [edit]
[-] test_cmath.py [edit]
[-] test_urllib_response.py [edit]
[-] ssl_key.passwd.pem [edit]
[-] test_tokenize.py [edit]
[-] test_format.py [edit]
[-] test_dynamic.py [edit]
[-] test_global.py [edit]
[-] test_os.py [edit]
[-] badcert.pem [edit]
[-] test_secrets.py [edit]
[-] test_pyclbr.py [edit]
[-] test_picklebuffer.py [edit]
[-] badkey.pem [edit]
[-] test_dbm.py [edit]
[-] test_nntplib.py [edit]
[-] test_flufl.py [edit]
[-] test_eintr.py [edit]
[-] test_multiprocessing_spawn.py [edit]
[-] test_xmlrpc_net.py [edit]
[-] tf_inherit_check.py [edit]
[-] nokia.pem [edit]
[-] test_audit.py [edit]
[-] final_b.py [edit]
[-] tokenize_tests.txt [edit]
[-] revocation.crl [edit]
[+] subprocessdata
[-] test_codecmaps_tw.py [edit]
[-] test_file.py [edit]
[-] cmath_testcases.txt [edit]
[-] test_signal.py [edit]
[-] test_codecmaps_jp.py [edit]
[-] test_int.py [edit]
[-] test_sqlite.py [edit]
[-] test_http_cookies.py [edit]
[-] sgml_input.html [edit]
[-] badsyntax_future5.py [edit]
[-] test_unicode_file_functions.py [edit]
[-] re_tests.py [edit]
[-] mod_generics_cache.py [edit]
[-] test_repl.py [edit]
[-] test_faulthandler.py [edit]
[-] test_telnetlib.py [edit]
[-] test_exceptions.py [edit]
[-] test_builtin.py [edit]
[-] test_frozen.py [edit]
[-] sortperf.py [edit]
[-] test_named_expressions.py [edit]
[-] test_codecs.py [edit]
[-] test_zipapp.py [edit]
[-] test_dictcomps.py [edit]
[-] test___future__.py [edit]
[+] dtracedata
[-] dataclass_module_1.py [edit]
[-] test_binascii.py [edit]
[-] test___all__.py [edit]
[-] testtar.tar [edit]
[+] test_json
[-] secp384r1.pem [edit]
[-] test_locale.py [edit]
[-] cfgparser.2 [edit]
[-] test_trace.py [edit]
[-] test_binop.py [edit]
[-] test_threadsignals.py [edit]
[-] test_fractions.py [edit]
[-] test_univnewlines.py [edit]
[-] test_argparse.py [edit]
[-] zipdir.zip [edit]
[-] test_marshal.py [edit]
[-] test_strtod.py [edit]
[-] test_hmac.py [edit]
[-] test_random.py [edit]
[-] test_urllib2.py [edit]
[-] test_syntax.py [edit]
[-] test_compile.py [edit]
[-] xmltests.py [edit]
[-] test_tracemalloc.py [edit]
[-] final_a.py [edit]
[-] test_functools.py [edit]
[+] capath
[-] pyclbr_input.py [edit]
[-] test_yield_from.py [edit]
[-] badsyntax_future6.py [edit]
[-] test_xml_dom_minicompat.py [edit]
[-] test_bdb.py [edit]
[-] test_ast.py [edit]
[-] test_ensurepip.py [edit]
[-] test_threadedtempfile.py [edit]
[-] test_keyword.py [edit]
[-] test_strftime.py [edit]
[-] test_logging.py [edit]
[+] decimaltestdata
[-] test_dataclasses.py [edit]
[-] test_lzma.py [edit]
[-] test_startfile.py [edit]
[-] test_venv.py [edit]
[-] test_zlib.py [edit]
[-] test_contains.py [edit]
[-] test_docxmlrpc.py [edit]
[-] test_stringprep.py [edit]
[-] test_defaultdict.py [edit]
[-] audiotests.py [edit]
[-] test_ctypes.py [edit]
[-] imp_dummy.py [edit]
[-] relimport.py [edit]
[-] test_codecencodings_tw.py [edit]
[-] test_genericclass.py [edit]
[-] cfgparser.3 [edit]
[-] dis_module.py [edit]
[-] test_cgi.py [edit]
[-] pycakey.pem [edit]
[-] test_xxtestfuzz.py [edit]
[-] test_winsound.py [edit]
[-] test_unicode_file.py [edit]
[-] test_msilib.py [edit]
[-] __init__.py [edit]
[-] pycacert.pem [edit]
[-] test_dbm_ndbm.py [edit]
[+] tracedmodules
[-] test_cmd_line.py [edit]
[-] good_getattr.py [edit]
[+] imghdrdata
[-] test_kqueue.py [edit]
[-] test_call.py [edit]
[-] bad_getattr3.py [edit]
[-] test_abc.py [edit]
[-] test_xdrlib.py [edit]
[-] test_generator_stop.py [edit]
[-] test_hash.py [edit]
[-] test_urlparse.py [edit]
[-] test_sax.py [edit]
[-] test_dict.py [edit]
[-] test_reprlib.py [edit]
[-] pstats.pck [edit]
[-] test_list.py [edit]
[-] ann_module6.py [edit]
[-] test_utf8source.py [edit]
[-] test_symtable.py [edit]
[-] test_ttk_guionly.py [edit]
[-] test_cmd_line_script.py [edit]
[-] doctest_aliases.py [edit]
[-] test_http_cookiejar.py [edit]
[-] test_turtle.py [edit]
[-] keycert4.pem [edit]
[-] ann_module2.py [edit]
[-] test_py_compile.py [edit]
[-] test_super.py [edit]
[+] test_import
[-] test_binhex.py [edit]
[-] test_coroutines.py [edit]
[-] test_contextlib_async.py [edit]
[+] encoded_modules
[-] test_ipaddress.py [edit]
[-] test_platform.py [edit]
[-] test_longexp.py [edit]
[-] test_codecmaps_cn.py [edit]
[-] test_unpack.py [edit]
[-] test_doctest.txt [edit]
[-] test_socket.py [edit]
[-] test_difflib_expect.html [edit]
[-] test_check_c_globals.py [edit]
[-] test_sys_settrace.py [edit]
[-] test_urllib2_localnet.py [edit]
[+] xmltestdata
[-] test_dtrace.py [edit]
[-] sample_doctest.py [edit]
[-] sample_doctest_no_docstrings.py [edit]
[-] test_csv.py [edit]
[-] testcodec.py [edit]
[-] badsyntax_future7.py [edit]
[-] test_htmlparser.py [edit]
[-] bad_coding.py [edit]
[-] zip_cp437_header.zip [edit]
[-] test_tabnanny.py [edit]
[-] double_const.py [edit]
[-] test_urllibnet.py [edit]
[-] test_asyncgen.py [edit]
[-] test_time.py [edit]
[-] test_pow.py [edit]
[-] test_tk.py [edit]
[-] test_profile.py [edit]
[-] test_smtplib.py [edit]
[-] test_stat.py [edit]
[-] test_generators.py [edit]
[-] test_isinstance.py [edit]
[-] test_index.py [edit]
[-] test_int_literal.py [edit]
[-] test_string.py [edit]
[-] test_keywordonlyarg.py [edit]
[-] test_fileinput.py [edit]
[-] test_weakset.py [edit]
[-] ssl_servers.py [edit]
[-] test_sched.py [edit]
[-] test_queue.py [edit]
[-] test_unparse.py [edit]
[-] test_typing.py [edit]
[-] test_poll.py [edit]
[-] test_mimetypes.py [edit]
[-] test_xml_etree_c.py [edit]
[-] test__locale.py [edit]
[-] cfgparser.1 [edit]
[-] test_select.py [edit]
[-] test_ssl.py [edit]
[-] test_print.py [edit]
[-] test_minidom.py [edit]
[-] test_contextlib.py [edit]
[-] test_exception_variations.py [edit]
[-] bad_getattr2.py [edit]
[-] test_shutil.py [edit]
[-] test_devpoll.py [edit]
[-] test_doctest2.py [edit]
[-] test_source_encoding.py [edit]
[-] audit-tests.py [edit]
[-] test_getpass.py [edit]
[-] test_fnmatch.py [edit]
[-] test_plistlib.py [edit]
[-] test_crashers.py [edit]
[-] test_future4.py [edit]
[-] test_getargs2.py [edit]
[-] test_gc.py [edit]
[-] badsyntax_pep3120.py [edit]
[-] test_userdict.py [edit]
[-] dataclass_module_1_str.py [edit]
[-] test_inspect.py [edit]
[-] test_codecmaps_kr.py [edit]
[-] test_tuple.py [edit]
[-] test_readline.py [edit]
[-] dataclass_textanno.py [edit]
[-] test_dbm_dumb.py [edit]
[+] test_importlib
[-] test_hashlib.py [edit]
[-] test_syslog.py [edit]
[-] test_pty.py [edit]
[-] test_pickletools.py [edit]
[-] regrtest.py [edit]
[-] test_wait3.py [edit]
[-] test_collections.py [edit]
[-] test_peg_parser.py [edit]
[-] test_string_literals.py [edit]
[-] test_multibytecodec.py [edit]
[-] test_range.py [edit]
[-] test_exception_hierarchy.py [edit]
[-] randv2_32.pck [edit]
[-] nosan.pem [edit]
[-] test_metaclass.py [edit]
[-] test_numeric_tower.py [edit]
[-] test_subprocess.py [edit]
[-] test_embed.py [edit]
[-] ssl_cert.pem [edit]
[-] test_dbm_gnu.py [edit]
[-] test_base64.py [edit]
[-] test_funcattrs.py [edit]